User manual SIEMENS EH7SA592E

[. . . ] EN Instruction mnual 03 . Table of contents Important information . 5 5 5 8 Familiarising yourself with the appliance . 10 11 11 The cooking with Induction . 12 12 Main switch with childproof lock . [. . . ] In hotplate number 1, the Powerboost function can be activated at any time, so long as the outer cooking zone (number 2) is not working (see picture). How to activate it Follow the steps below: 1. When it is in this position press the + symbol for the zone concerned. The letter x will appear in the indicator. You have activated the function. 24 How to desactivate it Follow the steps below: 1. Press the - symbol for the zone concerned. The Powerboost function has been deactivated. Limitations of use of the Powerboost function (hotplate 2) This function can only be activated when the outer zone (number 2) is working and cooking zones 3 and 4 are not activated. If cooking zone 3 or 4 is switched on when the Powerboost function is activated, the zone display will flash x and j alternately before returning to the maximum power level j. How to activate it Follow the steps below: 1. The letter x will appear on the display. How to desactivate it Follow the steps below: 1. The x will no longer be d displayed. The Powerboost function will have been disconnected. In certain circumstances, the Powerboost function may be deactivated automatically to protect the internal electronic components of the hob. 25 Timer function This function can be used in two different ways: - to switch a hotplate off automatically - as a cooking timer A hotplate is to switch off automatically Setting procedure You enter a specific cooking time for the desired hotplate. When the cooking time has elapsed, the hotplate switches off automatically. 1. Set the heat setting on the hotplate which is to be operated with the timer function. 2. Touch the and symbols at the same time. The 1 indicator for the required hotplate flashes. If you select a different hotplate, touch the and symbols repeatedly and at the same time until the 1 indicator for the required hotplate flashes. 3. Touch the and symbol. The default value appears. For : 30 minutes For : 10 minutes The 1 indicator for the hotplate flashes again. 4. Touch the or symbol until the desired cooking time appears in the timer indicator. The cooking time flashes for several seconds and then disappears. If you have set a cooking time for several hotplates, it is always the shortest cooking time that is displayed. [. . . ] It has been automatically deactivated to protect your hob. Wait a few minutes for it to cool down and switch it back on again. Disconnect the cooking hob from the mains. Check the connection and connect it again correctly. [. . . ]