User manual SIEMENS EUROSET 2005

[. . . ] Arrange the connecting lead where it will not cause accidents. position the telephone on a non-slip surface. For your safety and protection, the telephone must not be used in bath or shower rooms (wet locations). Never expose the telephone to sources of heat, direct sunlight or other electrical devices. [. . . ] The volume of the ringer can be set to one of 4 levels and can also be deactivated completely (default setting: level 4). To adjust while the telephone is ringing: Press H. While in handsfree mode, you can set the volume to one of 7 levels and save it (default setting: 1). The frequency (speed) of the ringer can be set to one of three levels (default setting: level 3). Baby call (direct call) number setting If a phone number is set for the Baby Call function, it is dialled automatically when the telephone is locked (s. "Activating/deactivating the telephone lock") after you lift the handset (or press the Loudspeaker key) and press any key (except ?The telephone does not allow other phone numbers to be dialled, but incoming calls can be received. When the baby call function is activated, you will see è and { in the display. Ten different ringtones can be set for the ringer (default setting: ringtone 9). To set while the telephone is ringing: 0. The volume on the handset can be set to one of 3 levels and saved (default setting: level 1). If the same subscriber calls more than once, a new entry is not created. up to 99 repeated calls are displayed in the additional information. Sequence of list entries: The most recent call is displayed in the first position (position number "01"). Older entries are moved downwards with each new incoming phone number until they are deleted from the list. In the calls list you can scroll through the phone numbers displayed, query additional information: (a) date and time, if this is transferred from the telephone system, otherwise only the time according to the telephone's internal clock, (b) frequency of an incoming phone number, delete entries, save phone numbers from the calls list to a repertory key (see page 3), dial a displayed phone number directly. Using functions for additional services of public telephone systems If you want to use services that are to be triggered with the Recall key, make sure beforehand that the correct flash time is set for the key. Recall key (in public telephone systems) In public telephone systems, this key is required to use certain additional services. The appropriate flashtime for the specific country must be set before using the Recall key can be used: Belgium, Netherlands, Switzerland: 120 ms (access code 1) France, Luxemburg, Portugal, Germany, Greece: 270 ms (access code 2) other European countries: 90 ms (access code 0). If there are entries in the calls list that have you have not yet seen, flashes in the display. You can retrieve the calls list, scroll through its entries, view additional information about a call and call back directly: A Press the Down key. The phone number of the most recent call appears in the display. [. . . ] With this, you still have the option to set a forwarded call destination that may change on a case-by-case basis. GB (b) Changeable call forwarding Enter the phone number of the forwarded call destination, press the last number redial key to mark the end of the phone number entered. You may hear an announcement that the service is activated. Incoming calls will be forwarded from now on to the forwarded call destination. [. . . ]