User manual SIEMENS GIGASET 4000 MICRO

[. . . ] KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Status LED (light-emitting diode) lights up during a call; flashes at: ­ Incoming call ­ New messages ­ Alarm call, appointments, anniversaries Reception strength Control key Talk key ­ Accept call ­ Dial number ­ Switch from handsfree talking to handset Open the directory Key 1 Hold down to select Answ. Machine/Mailbox Asterisk key Hold down to activate and deactivate the ringer Keypad protection On/off hold key down! [. . . ] This function is not available in all countries. The handsfree key flashes and open listening is activated. The function is deactivated after ten unsuccessful call attempts or if a call was made in the meantime. Press 2II or any key if the person you called is not available. If the other person answers press the talk key. Copy to Directory ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]] The telephone number is entered. + If you like you can change the number and enter a name (you can also enter an anniversary s. For notes on how to enter letters and characters s. With the directoryyou can store up to 200 telephone numbers and then dial them at the push of a button. You can save the prefixes (Call-by-Call)* of telephone companies in the network access list . The directory and network access list are used in exactly the same way. + Enter the telephone number (no more than 32 digits). + Scroll to the name field and enter the name. For example for "E" keytwice or scroll with the key. After selecting the name you can also open the menu, select Display Number , extend/change the number and dial with the talk key #. + Enter the telephone number of the person you want to call. Speed dialling from the network access list You can store 8 speed dialling numbers in the network access list. Enter a speed dialling number (2­9) before the name. Example: Press speed dial key 2 and then enter the network provider's name. The first letter of the name is automatically written in uppercase and the rest in lowercase. Delete characters with Letters are always inserted to the left of the cursor. Inserting a blank 6before a name takes that name to the top of the directory (for example "6Karla" ). [. . . ] When this function is activated you can remove the handset from the charging unit without pressing the # key to accept a call (factory setting). The directory, the network access list and the caller list are not deleted when you reset the handset. Function Handset volume Ringer volume ("ring tone" ) , Ringer melody Auto talk Battery low beep Handsfree volume Room monitor level Time control Display language Redialling list Vibration alarm Factory setting 1 5 1 On On 3 high off local deleted off You can use your handset as a baby monitor. The handset should be placed at least 1 to 2 meters away from your baby. [. . . ]