User manual SIEMENS GIGASET SE366 WLAN

[. . . ] Our goal is a sustainable process that makes it easier for us to comply with the strict stipulations of the ISO standard 14001 for international environmental management. Further advantages for the ecology u Thanks to a switched-mode power supply, all our routers and repeaters use up to 60% less power and so offer higher energy efficiency. U You can reduce the WLAN's transmitting power for all routers and repeaters and some WLAN clients ­ depending on the device in question and your PC's operating system. U One Gigaset SE366 WLAN, u One mains adapter (100 V - 240 V / 12V DC 1A), u One cable with RJ-45 jacks (CAT5), u One CD containing several documents (user guide, Das lokale Netzwerk konfigurie- To operate your Gigaset SE366 WLAN you need: In order to benefit from the increased data throughput gained by using 802. [. . . ] If the correct SSID has been entered in your PC's wireless network adapter, the wireless link will be established automatically once you connect your Gigaset SE366 WLAN to the mains power supply (see page 21). You should then set the encryption on the Gigaset SE366 WLAN and on the wireless network adapter. Your Gigaset SE366 WLAN is now ready for use: U The power LED on the front lights up. U The WLAN LED lights up to indicate that the Gigaset SE366 WLAN is ready to open The radio link to a PC that is connected by means of a wireless network adapter is opened automatically provided the network adapter has been configured with the same SSID as the Gigaset SE366 WLAN. It can take a few seconds for the wireless connection to be established. The WLAN LED flashes when data is sent or received via this connection. In order to communicate via the Gigaset SE366 WLAN, you must carry out the network configuration on the connected PC (see page 25). To access the Internet via the Gigaset SE366 WLAN, you must configure your Internet connection (see page 25). Once you have configured one PC as described above you can connect additional PCs to the Gigaset SE366 WLAN. You will need an additional cable for each PC you want to connect via cable. To connect additional wireless PCs, you will need a wireless network adapter, e. ì Install wireless network adapters on every other PC in accordance with the respective user guide. You can connect additional PCs via WPS (see page 22) or make the security settings manually (see page 23). please note that the SSID of all wireless network components (Gigaset SE366 WLAN and network adapter) must be identical. If you connected the first PC via WPS and want to connect other PCs without WPS, you have to ­ check the generated values for the SSID and encryption in the configuration program for the Gigaset SE366 WLAN and ­ configure the wireless network adapters on the PCs accordingly. ì If necessary, set up the network for each newly connected PC (see page 25). ì Connect the network card of each additional PC to a free LAN port (LAN1 ­ LAN4) ì Make sure that the corresponding LAN LED on the front of your Gigaset SE366 WLAN ì If necessary, configure the network for each newly connected PC (see page 25). Before the PCs can communicate with the Gigaset SE366 WLAN and with each other in a local network, you must change their network settings. This will normally be the case if you are using the default settings. For further information in this regard, please refer to the document entitled "Configuring the local area network" on the CD. You can then carry out the basic Gigaset SE366 WLAN configuration. You now need to make a few configuration settings so that you can use your Gigaset SE366 WLAN to operate a local network and establish a connection to the Internet. [. . . ] A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address: www. Om de andra enheterna i ditt trådlösa nätverk också har tillgång till WPS, som till exempel Gigaset PC Card 300, kan du skapa anslutningen med ett klick. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. United Kingdom All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. [. . . ]