User manual SIEMENS GIGASET 4015 COMFORT

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] Copy 50 Text messages (SMS) Press keys: The national prefix must be entered with the recipient's telephone number even for numbers in the local network. Example: 089 12345678 national telephone number in the fixed network 017X 1234567 telephone number in the mobile telephony network 0049 89 12345678 telephone number with international prefix* When sending an SMS, you do not need to enter your sender telephone number. The SMS centre automatically enters your telephone number as the sender address. If you are called while writing an SMS the SMS will be copied to the outgoing list. You can accept the incoming call and go on writing the SMS afterwards. During the transmission of an SMS the following message is displayed on all handsets: "SMS is being transferred". Text messages that could not be sent are copied to the incoming list and are assigned an error status (see page 57). Settings and stored SMS messages are not lost in the event of a power failure. Contact your service provider if you need answers to the following questions: G G What are the charges for sending and, where applicable, receiving an SMS?To which mobile telephone operators can I transmit SMS messages and from which mobile telephone operators can I receive SMS messages? * The "+" character cannot be entered. (At the time of going to print it was not possible tosend SMS internationally!) 51 Text messages (SMS) Press keys: Incoming list Reading and deleting received SMS messages The status LED flashes on all handsets to signal new text messages (SMS). Date and time are specified for each SMS received (as set in the telephone, see page 11). The SMS messages are sorted in chronological order. The first ring tone is suppressed in the case of an incoming text message (SMS). This allows your Gigaset to distinguish between text messages (SMS) and calls. New text messages appear before old text messages. G Open the menu D [ Select the text message. Text Message ----------Text Message--------Incoming 02/04 Outgoing Service Centr. 1 Total old SMS messages Total new SMS messages Z D [ Open the incoming list. Incoming --------------Incoming------------New SMS 1/2 08912345678 12. 07. 00 11:33 Delete Read Read Total new SMS messages Number of the new SMS Read the SMS Delete the SMS. or Delete E D Scroll to the next or previous SMS. 52 Text messages (SMS) Press keys: When it has been read a new SMS receives the status "old SMS" . If your incoming memory is full you will see the message:"SMS lists are full. Please delete messages" Confirm with [ and delete all . You can store a total of 13 SMS messages (depending on the country). Options while reading After reading an SMS you can immediately reply to it or you can access other functions. Hi Peter, can't come today because I have a dental appointment. Open the menu, then select the option you want. G G G G G Write Message Reply: Yes/No Edit Text Forward Text Copy to Directory Write a new message as a reply. Copy the telephone number of the SMS to the directory. 53 Text messages (SMS) Press keys: Outgoing list All SMS messages that have been stored are displayed in the outgoing list. After transmission, these messages remain in the list until manually deleted. Messages that were already released for transmission cannot be retrieved; they are not displayed in the outgoing list. Reading, editing, sending or deleting stored SMS messages D [ Select the text message. Text Message ----------Text Message--------Incoming 02/04 Outgoing Service Centr. 1 G Open the menu. Z D [ Open the outgoing list. Outgoing --------------Outgoing------------Saved 1/2 08912345678 12. 07. 00 11:33 Delete Delete Read Total stored SMS messages First SMS message Delete the SMS Display the text of the SMS. When reading a stored SMS you can: or Read Open the menu, then select the option you want. G G Write Message Edit Text Write and send a new SMS. [. . . ] 3 m 105 Procedures for mailbox features Activating/deactivating functions Name Suppress the telephone number for one call Activate call waiting Deactivate call waiting Set call divert: When busy Immediately No answer Deactivate general call divert: When busy Immediately No answer Activate selective call divert: #67# #21# #61# *67*NUMBER# *21*NUMBER# *61*NUMBER# Great Britain/Ireland 141 *43# #43# Functions during a call Name Enquiry calls Resume Toggling Initiate conference End conference Callback when busy on Callback when busy off Accept call waiting Reject call waiting 5 #37* R Great Britain/Ireland R R1 R2 106 Compatibility Compatibility The following list shows which Gigaset handset functions are supported by the different Gigaset base stations. Gigaset base station 303x 3010 / 3015 Dialling with the network access list + + Dialling a number from the local directory + + Dialling a number for the redialling list + + Internal calls (selective call/collective call) + + Handsfree talking at the Comfort handset + + Open listening can be activated from the base + + (3015 only) station Call duration display + + Walkie-Talkie between two Comfort handsets + + (G4000 Comfort) CLIP caller list administration + + Internal room monitoring + + Handset clock + + Directory transfer between G3000 Comfort + + and G4000 Comfort handsets Room monitoring + + Call charge/duration display + + + (3015 Support of all answering machine functions + only) 4000 Comfort handset Language selection 4000 Comfort handset - - Open listening at the base station Directory transfer between two G4000 Comfort handsets Internal room monitoring Walkie-Talkie between two handsets (G4000 Comfort) CLIP display at G4000 Comfort handset CLIP caller list administration Full support of G4000 base station select carrier services Call charge/duration display at the Comfort handset Gigaset base station 4010/15 Classic + (4015 only) + + + + + + + 107 Compatibility 4000 Comfort handset Gigaset base station Support of all answering machine functions of the + 4015 Classic base station (except for remote operation, info function) Date and time display on Comfort handset + Language selection possible SMS support: SMS message can be sent and received Access level configuration 4000 Comfort handset Gigaset base station 4035/4135isdn - Language selection SMS support Activate answerphone display and record on mobile handset Operation by voice command Automatic mobile network provider prefix Externally deactivate babyphone 3000 Classic/Comfort handset Gigaset base station 4010/15 Comfort Dialling with the network access list + Dialling a number from the local directory + Dialling a number for the redialling list + Internal calls (selective call/collective call) + Handsfree talking at the Comfort handset + Open listening can be activated from the base station Call duration display + Walkie-Talkie between two Comfort handsets + (G4000 Comfort) 108 Compatibility Gigaset base station 4010/15 Comfort CLIP display at G 4000 Classic handset + CLIP caller list administration + Access level configuration + Full support of 4010/4015 Comfort base station sel+ ect carrier services Call charge/duration display at the Classic handset + Support of all AM functions of the 4015 Comfort + base station Time display on the Classic handset + Language selection SMS support Open listening possible at the base station Directory transfer with a 4000 Classic handset Internal room monitoring Walkie-Talkie mode - 4000 Classic handset 109 Menu table Menu table It is quicker to select a menu function by pressing and inserting the digit combinations than by scrolling!E. g. : = 4-4 to set the date. Main menu when the telephone is idle, press: 1 Text Message 1-1 1-2 1-3 1-4 1-5 3-1 3-2 4-1 4-2 4-3 4-4 5-1 5-2 5-3 7-1 7-2 7-3 7-4 7-5 Write Message Incoming Outgoing Service Centr. 1 Service Centr. 2 Room Monitor. Alarm Clock Missed Dates Date/Time Handset Volume Ringer Settings Advisory Tones Auto Answer Language Register H/Set Select Base Reset Handset [entry] 3 Add. [. . . ]