User manual SIEMENS GIGASET 5015 QUICK GUIDE

[. . . ] 1 IRL Gigaset 5015* Quick Guide 9 10 11 12 1 No memory content PIN entry Telephone locked zzzz 0­9 Phone number With tone dialling: n ­ * key pressed ­ # key pressed With additional services from public network providers: ë Call waiting TM Call forwarding immediately ~ Call forwarding on no reply -- Call forwarding when busy z ---- 8 7 6 Safety precautions When installing, connecting and operating the telephone, always observe the following precautions: Only use the plugs and leads supplied. Only connect the connecting lead to the socket/jack provided for that purpose. Arrange the connecting lead where it will not cause accidents. Position the telephone on a non-slip surface. [. . . ] The optimum distance for speaking into the microphone is around 50 cm. Activating via the handset during a call: L + a Replace the handset while pressing the Loudspeaker key. Activating before dialling a phone number L Before you dial: press and hold the Loudspeaker key until the dialling tone is audible. Deactivating handsfree mode: c Lift the handset during a call. Locking/unlocking the telephone Only the Baby call number can be dialed when the telephone is locked. c?M Lift handset, then start the function. 1 or 2 0: unlock; 1: lock o Enter the PIN (default setting: 0000). If the telephone is locked, the display shows zzzz. Temporarily deactivating the telephone lock (for one call) cMo Lift the handset, press the lock key, enter the o PIN (default setting: 0000). The telephone lock is active again when the handset is replaced. Activating/deactivating the mute melody You can activate and deactivate the mute melody for the mute (default setting: on). c?19# 0/1 ?a Lift handset, initiate function. Replace handset. Locking/unlocking repertory numbers so they cannot be changed c?M6 o 0/1 ?a Lift handset, initiate function. (If necessary, press = in order to lock/unlock the repertory key on the 2nd level. ) Enter the PIN (default setting: 0000). 0: Repertory keys not locked 1: Repertory keys locked. Replace the handset. 5 IRL Changing the PIN c?M9 o o o ?a Changing dialling modes during a call If your telephone is set to pulse dialling and you want to use functions that require tone dialling (e. g. remote access to an answering machine), you can change the dialling mode during a call. * With an open connection: press the star key. o Enter digits for remote control/data transfer. The telephone is reset to the original dialling mode by hanging up the handset. Lift handset, initiate function. Enter the current PIN (default setting: 0000). Replace the handset. Call duration display The telephone can display the approximate call duration in the display (up to 99 min. If the call duration display is activated, the time display begins 12 seconds after the last digit is dialled. Resetting the counter After dialling the first digit or at any point during a call: N Press the Reset key. Deactivating/activating The call duration display is activated by default. Replace handset. Operation on a PABX Enter/delete an external line prefixe If you are using your telephone on a PABX, you may have to save one or more external line prefixes. [. . . ] : Press the repertory key that is designated for symbol display "TM off" (see page 6). o # ?a or . . . #21# ?a c= :a = Enter the select function for "Immediate call forwarding". Replace handset. Deactivating call forwarding with a function key Lift handset, press the Shift key. Press the repertory key for symbol display "TM off". You may hear an announcement that the service is deactivated. # ?a c= : Activating call forwarding with a function key Appendix Care To clean, wipe with a moist or antistatic cloth only, never with a dry cloth (risk of electrostatic charging and discharge) or harsh cleaning agent. a If your telephone is not working perfectly No signal tone: The tone volume might be set to 0. [. . . ]