User manual SIEMENS GIGASET A120

[. . . ] 1 Gigaset A120 english Handset A12 Base 1 Charge status of the battery pack 2 Internal number of the handset 3 Display keys 4 Directory key 5 Talk key 6 End call and On/Off key 7 Ringer on/off (long press) 8 Keypad lock 9 Recall key - Confer (Flash) - Dial pause (long press) 10 Microphone 11 Speed dial list key 1 2 V 22-35 Þ Ü INT MENU 1 Register/Paging key (page 4/page 5) 3 Display keys: Pressing the keys launches whichever function that appears above them in the display. Display icon Meaning when pressed Open the last number redial list (page 4). Open the calls or network mailbox list (page 4). Open the list of registered handsets (page 5). [. . . ] If there is more then one entry, select the name. Press the talk key. Û Select an entry (see above)¢ MENU. The following functions are available: DELETE COPY TO DIR TIME STATUS DELETE LIST Using the calls list ¢ Delete an individual number Store a number in the directory. Enter name Establish date and time of a call Read or not read Delete complete calls list Speed dialling Example: Press key I long ¢c. Last number redial list This list contains the five last dialled numbers. The following functions are available: ¢ Calling back a caller from the calls list: Û Select an entry c. ¢ ¢ EDIT ENTRY COPY TO DIR Add/edit number and use to dial Registering and de-registering handsets You can register up to four handsets on your base station. A Gigaset A12 handset that is not yet registered on a base is registered automatically. Other handsets must be registered manually. Clear the list: Þ ¢MENU¢L ¢OK. ¢ Store number in directory Dialling a number You can select a number from the last number redial list: Þ Select an entry c. ¢ Automatic registering: Gigaset handset A12 Any Gigaset A12 handset that is not registered to a base can be registered automatically. To register a handset for the first time, place it in the base with the display facing forward. Registering takes about 1 minute; a number of icons flash in the display. The handset is automatically assigned the next available internal number (1­4). This number appears in the top left of the display after successful registering, e. g. If all of the internal numbers 1 to 4 are used up (i. e. four handsets have been registered), handset number 4 is de-registered and overwritten. Calls list/Mailbox list Press the display key Û to open the caller list and mailbox list (see Menu Tree, page 9). Calls list: The number of the last 30 missed calls are stored. When the phone is in idle status, new missed calls are indicated by a flashing Û . Example of how the calls list appears: CALLS 02/08 Number of old, read entries Number of new entries Opening the calls list and selecting an entry You can view entries you have already read. Manual registering: Gigaset handset A12 Û s CALLS Open calls list. OK CALLS 05/10 Select the menu item and confirm. On the handset: MENU REGISTER HS enter your system PIN (default is 0000) OK. The display shows REGISTER HS during the registration procedure. of entering the system PIN, press the register/paging key on the front of the base (page 1) and hold for approx. The registration process starts. ¢ ¢ ¢ 5 Manual registering: Other handsets Other handsets are registered as follows: 1. On the handset: Start to register your handset as described in its operating instructions. [. . . ] KG, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/ EC. A copy of the 1999/5/EC Declaration of Conformity is available at this Internet address: http://www. siemens. com/gigasetdocs. Care Wipe the base station and handset with a damp cloth or an antistatic wipe. This can cause static! Contact with liquid ! If the handset has come into contact with liquid: 1 Switch the handset off and remove the battery pack immediately. 2 Allow the liquid to drain from the handset. [. . . ]