User manual SIEMENS GIGASET DA510

[. . . ] u Never expose the telephone to sources of heat, direct sunlight or other electrical devices. u Protect your telephone from moisture, dust, corrosive liquids and vapours. u Do not touch the plug contact with pointed or metallic objects. u Do not carry the telephone by the leads. [. . . ] c K Lift the handset, press the set key. Q/ /2 Press the number key for the setting you want: 0: Deactivate lock 1: Activate lock K & Press the set key, hang up the handset. Setting the ringer You can set the ringer melody and volume or turn the ringer off. £ Setting the ringer volume Lift the handset, press the set key. K & Press the set key, hang up the handset. You can change the ringer volume also during ringing by using the G key. cK 2: Temporarily deactivate lock (for the next call). Do not hang up the handset. Gigaset DA510 /IM1 en / A30054-M6530-R101-3-7W19 / DA510_en. fm / 17. 01. 2012 6 en If the keylock is activated, the G key will flash with a rapid doubleflash when you pick up the handset. ~ Dial the number. Activating direct calling Lift the handset, press the set key. K & Press the set key, hang up the handset. When you pick up the handset, the direct call key lights up. cK Emergency calls Two emergency phone numbers (110, 112) are preset in your phone and cannot be changed. You can programme a third emergency number with up to 32 digits yourself. Emergency numbers can also be used when the keylock is activated. Programming an emergency number Deactivating direct calling Lift the handset, press the set key. K & Press the set key, hang up the handset. Direct calling is deactivated. cK ~ cK N5 K& cK Lift the handset, press the set key. Press the set key, hang up the handset. Blocking und unblocking numbers You can block phone calls to specific dialling codes (e. g. You can block up to 3 numbers. Deleting the emergency number Lift the handset, press the set key. K & Press the set key, hang up the handset. The emergency number is deleted. Blocking numbers cK Direct calling (baby call) If direct calling is activated, you can dial the stored number by pressing any key (except for the set key K ). NL /2/3 Lift the handset, press the set key. Press a number key 1, 2 or 3 under which you want to store a blocked dialling code. Enter the dialling code you want to block (e. g. 0900, 001 or the first few digits (up to five) of a phone number. Press the set key, hang up the handset. ~ K& Gigaset DA510 /IM1 en / A30054-M6530-R101-3-7W19 / DA510_en. fm / 17. 01. 2012 7 en Unblocking numbers To unblock the numbers: c K Lift the handset, press the set key. /2/3 Press a number key 1, 2 or 3 under which the number you want to unblock is stored. K & Press the set key, hang up the handset. Changing the dialling mode cK # /2 K& Lift the handset, press the set key. Press the set key, hang up the handset. Changing the flash time You can change the flash time if the dialling mode is set to tone dialling (see above). [. . . ] Regular pulse noises can be heard during a call: The connection is receiving metering pulses from the exchange, which the telephone cannot interpret. Contact your network operator. Authorisation This device is intended for analogue phone lines in the UK and on the Irish network. Country-specific requirements have been taken into consideration. We, Gigaset Communications GmbH, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/EC. [. . . ]