User manual SIEMENS GIGASET S185

[. . . ] s Version: 23-06-2009 A 3 1 0 0 8 - M1 7 2 9 - R4 0 1 - 1 - 5 8 1 9 Issued by Gigaset Communications GmbH Schlavenhorst 66, D-46395 Bocholt Gigaset Communications GmbH is a trademark licensee of Siemens AG Gigaset Communications GmbH 2009 All rights reserved. www. gigaset. com Gigaset S185 Gigaset The handset at a glance The handset at a glance 16 15 INT 1 V 1 2 01. 31. 08 9:45am Menu 3 14 13 12 11 7 10 8 4 5 6 9 1 Display in idle status 2 Charge status of the batteries = e V U (empty to full) = flashes: batteries almost empty e V U flashes: batteries charging 3 Display keys (page 16) 4 Message key Access to calls and message lists; Flashes: new message 5 Flash key - Confer (Flash) - Insert a dialing pause (press and hold) 6 End call key, On/Off key End call, cancel function, go back one menu level (press briefly), back to idle status (press and hold), activate/deactivate handset (press and hold in idle status) 7 2. 5 mm socket for headset (mono) 8 Pound (#) key Key lock on/off (press and hold in idle status) Toggle between upper/lower case and digits 9 Microphone 10 Star (*) key Ringtones on/off (press and hold) Open table of special characters 11 Key 1 Fast access to answering machine/network mailbox (press and hold) 12 Talk key Answer a call, start dialing 13 Handsfree key Switch between earpiece and handsfree mode; Lights up: handsfree activated; Key flashes: incoming call 14 Control key (page 15) 15 Answering machine symbol Answering machine switched on. Flashes: answering machine is recording a message or is being operated by another caller. 16 Signal strength i (high to low) | flashes: Out of Range 1 Base station at a glance Base station at a glance 3 4 5 2 1 6 7 Please remember: u If the answering machine is being oper- ated from a handset or if it is recording a message, it cannot be operated from the base station. [. . . ] v Handset Register H/Set s Select base station, for example Base 1 and press OK. ~ Enter the system PIN of the base station (the default is 0000) and press OK. The screen will display the number, for example Base 1. Automatic registration: Gigaset handset to Gigaset S185 base station Important: The handset must not yet be registered to any base station. Registering the handset to the Gigaset S185 base station occurs automatically. Place the handset in the base with its display facing outwards. During this process, Regstr. Procedure appears in the display and the name of the base station flashes, for example Base 1. When the handset has been registered, its screen displays its internal number, for example INT 2 for internal number 2. The handset is assigned the lowest available internal number (1-6). If all internal numbers 1-6 have been assigned, number 6 is overwritten, assuming that the handset with the internal number 6 is in idle status. On the handset On the base station Within 60 secs. press and hold the registration/paging key on the base station (page 2) (approx. 3 secs. ). De-registering handsets You can de-register any registered handset from any registered Gigaset handset. The handset you are currently using is indicated by <. s Select the internal user you wish to de-register. ~ Enter current System PIN and press OK. Yes Press the display key. Note: Automatic registration is not possible when the base station on which you wish to register the handset is being used to make a call. Each key press interrupts the automatic registration. If automatic registration does not work, you will have to register the handset manually. You can change the name of the handset (page 32). 30 Using several handsets Locating a handset ("paging") You can locate your handset using the base station. Press the registration/paging key on the base station briefly. All handsets will ring at the same time ("paging"), even if the ringers are switched off. Ending a call a Press the end call key. Transferring a call to another handset You can transfer an external call to another handset. The external caller hears the hold melody if activated (see page 39). s Select a handset or Call All and press OK. [. . . ] GOVERNING LAW TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL GIGASET NAM, SELLER OR THEIR SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, THE PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS LIMITED WARRANTY, EVEN IN THE EVENT OF THE FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF GIGASET NAM OR SELLER OR ANY SUPPLIER, AND EVEN IF GIGASET NAM OR SELLER OR ANY SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. REPAIR OR REPLACEMENT, AS PROVIDED UNDER THE WARRANTY, IS YOUR SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED WARRANTY. 49 Index Index A Access protection . 23 answering machine (remote operation) . 24 recording a personal announcement/ announce only . [. . . ]