User manual SIEMENS HB64AA250F/01

[. . . ] 19 Remote control of answering machines . 25 Connecting cord-based analogue devices . Making calls with devices on the analogue connection (TAE connection) . 25 28 29 30 30 Operation of entrance telephone . [. . . ] If the analogue connection is configured differently the External setting is not offered. Please comply with any legal regulations. If the wait melody is deactivated, no setting can be made. External Off By default, Internal is activated. You must make these settings on the handset. Further information about this will be found in the operating instructions for your handset. No device connected For each TAE connection, to which no device is connected, the device type must be set to No function, in order to prevent malfunctioning of the Reject all (see handset operating instructions) and Busy on busy (see handset operating instructions) ISDN functions. 27 Connecting devices Making calls with devices on the analogue connection (TAE connection) Telephones with tone dialling (DTMF = dual tone multi-frequency dialling) can be operated on the analogue connections. Telephones with pulse dialling are not supported. Automatic line seizure With automatic line seizure activated, the external line is seized as soon as the receiver is lifted. As a consequence, normal internal dialling is no longer possible. However, an internal call is still possible by way of an internal enquiry using the S key. You can activate automatic line seizure with any added-feature handset (see added-feature handset operating instructions). Making external calls Auto. line seizure active c~ Making internal calls Auto. line seizure inactive c~ Group call to all internal users Auto. Only connect the USB cable to the PC when prompted to do so by the PC program talk&surf 6. 0. A wire-based connection via the USB port on the base provides you with a 128 kbit/sec. interface. Gigaset Repeater You can increase the range of your handsets with the Gigaset Repeater. Your telephone is set up to use a Gigaset Repeater (accessory). To ensure the Repeater is installed correctly, Repeater mode must be activated on the base (see handset operating instructions). 30 Operation of entrance telephone Operation of entrance telephone For details of setting up an entrance telephone, refer to the handset operating instructions. Connecting entrance telephones In case of questions about the entrance telephones shown here or any other systems, please contact the respective manufacturers or suppliers. We ask for your understanding that Gigaset Communications GmbH * cannot provide any guarantee of the currency, completeness and accuracy of the circuit diagrams. Current circuit diagrams are available from your retailer. Door type 1 The following examples provide guidance for connecting entrance telephones using a TFE adapter (door type 1). Siedle TLM 512/612, TLE 061, CTB 711 Basis-BA Augsburg Ritto entrance telephone and door opening system * Gigaset Communications GmbH ist Markenlizenznehmerin der Siemens AG 31 Operation of entrance telephone ! Caution!Connect base power unit 6573 and additional unit TFV5680 using enclosed bus connector. Ritto TwinBus entrance system Basis-BA Augsburg ! Caution!Connect base power unit 4753/01 and additional unit TFV4680/00 using enclosed bus connector. Door type 2 (DTMF) For details of connecting entrance telephones with DTMF control (door type 2), refer to the example below. Deutsche Telekom DoorLine Basis-BA Augsburg 32 Appendix Appendix Care Wipe the base and handset with a damp cloth (no solvents) or an antistatic cloth. [. . . ] Pre-dialling, see also "Block dialling" For some telephones with a display you can enter the phone number first, and check it once more before dialling. 47 ISDN glossary R Remote activation Allows the answering machine to be activated and deactivated during a call. Remote check Answering machine function. Listen to messages remotely, mostly together with options like delete messages or change announcements. Repeater A repeater increases the range of a handset connected to a base station. [. . . ]