User manual SIEMENS HKW-600

[. . . ] If your car is fitted with metallised windows, this may impair the reception of the phone. for optimum signal reception , always use an external antenna. Your phone and the Car Kit must be equipped with an external antenna for installation. Improper use and opening of the components invalidates the warranty. [. . . ] Make sure that the electronics box 1 is securely mounted. Ensure that the ventilation slots on the electronics box 1 are not covered (at least 2 cm space) and the installation does not cause interference with any other devices. * For vehicles with car radios with mute connections. Feed the cable of the external microphone : around the clip provided for strain relief (see diagram). Secure the electronics box 1 in the passenger-side footwell (for example) with two screws 2. With the Car Kit Bluetooth you can enjoy optimal communication in your car with full-duplex handsfree talking and superb ease of use. You can speak on the phone as if you were talking to the passenger next to you. Other trademarks and trade names are those of their respective owners. To detach the display 6 from the display holder 7 insert a screwdriver into the narrow opening between the two elements. The Car Kit communicates with the phone via BluetoothTM, a short range radio link. To make this communication possible, the Car Kit and the phone must be linked with each other. For more information please read "Establishing the first connection with the telephone", p. No/reject The Car Kit is operated by the display keys which can be pressed both upwards and downwards. ⷠThe key on the left is for confirming/rejecting · The key on the right allows you to browse through the lists. Down The symbols below are used to represent the four different actions. Yes/accept no/reject up down When a long press is required, "long press" is written in the user guide. In all other cases, pressing the key briefly is enough. Establishing the first connection with the telephone Note For details of how to establish a Bluetooth connection, please refer to the operating instructions for your phone. Activate your phone's Bluetooth interface and begin a search on your phone for Bluetooth devices in the area that are ready to receive. ⷠWhen the Car Kit is found, your phone will ask you to type in a PIN number as confirmation · After the confirmation the Car Kit shows the identification of the phone on the display and then switches into stand-by mode. For phones from other manufacturers it is likely that confirmation on the phone will be required before the switch to stand-by mode. From then on, the Car Kit is ready for use. [. . . ] Mobile Holder Antenna/ Mobile Holder With these additions, the following extra functions are available: antenna connection, phone charging, safer storage of the phone in the car. Phones without Bluetooth functionality from the 65th generation or above can be used. for connecting to the car radio: · Phone-In adapter cable Products are available from specialist dealers or visit our online shop at: Siemens Original Accessories www. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. [. . . ]