User manual SIEMENS JB11AA50

[. . . ] KG (SHC), die ihrerseits das Gigaset-Geschft der Siemens AG fortfhrte. Etwaige Erklrungen der Siemens AG oder der SHC in den Bedienungsanleitungen sind daher als Erklrungen der Gigaset Communications GmbH zu verstehen. Wir wnschen Ihnen viel Freude mit Ihrem Gigaset. Chre Cliente, Cher Client, la socit Gigaset Communications GmbH succde en droit Siemens Home and Office Communication Devices GmbH & Co. [. . . ] then a A missed appointment is indicated by , a missed anniversary by , . 12 Making calls Making calls Making external calls and ending a call ~ (enter the number) and press c (the 'talk' key) the sequence does not matter. To end a call/cancel dialling: press a ('end call' key). Dialling pause You can insert a dialling pause between the prefix and the actual telephone number. To do this, press S for around 2 seconds. Now enter the telephone number. Internal calls, ending a call Calls to other handsets that are registered to the same base are free of charge. Calling a specific handset u; s (select handset); press c. To end the call: press a ('end call' key). Calling all handsets ("group call") u; press P (star key). To end the call: press a ('end call' key). Answering a call Your handset rings, the call is displayed and the handsfree key d flashes. Press c (Talk key) (or display key Accept or handsfree key d). If the Auto Answer function is activated (page 22) you just need to lift the handset out of the charger to take the call. If the ringer is intrusive, press the display key Silence. You can take the call so long as it is displayed on the screen. Handsfree Activating/deactivating handsfree Before you dial: ~ (enter the number); press d (the handsfree key). During a call: press d (the handsfree key). Precondition: Calling Line Identification. So that you do not have to enter a similar entry twice, you can create a copy and then edit that entry. 15 Using the directory and other lists Sending a single entry or complete list to a handset You can send individual entries or the entire list to another SL 1, S1 or C2 handset or a Comfort handset in the Gigaset 4000, 3000 or 2000 series that is registered to the same base. Stored voice patterns and speed dial numbers are not sent. The VIP settings are sent depending on the handset. s or C (open directory/speed dial list); s (select entry); v (open menu); s Copy Entry OK or s Copy List OK ); ~ (enter the internal number of the receiving handset); OK . You can select further entries provided you confirm with the display key Yes after you have sent an entry. Select No to stop sending. Voice-activated dialling With voice-activated dialling, you dial simply by speaking the name of the person you wish to call. To do this, you must first store a voice pattern, i. e. the name which you speak will be stored in the handset. Up to four users can store/record a voice pattern per entry. Before he records a voice pattern, the user must "identify" himself, e. g. [. . . ] In particular claims under the Guarantee cannot be made if: The device is opened (this is classed as third party intervention) Repairs or other work is done by persons not authorised by Siemens. Components on the printed circuit board are manipulated The software is manipulated Defects or damage caused by dropping, breaking, lightning or ingress of moisture. This also applies if defects or damage was caused by mechanical, chemical, radio interference or thermal factors (e. g. : microwave, sauna etc. ) Devices fitted with accessories not authorised by Siemens This Guarantee shall not apply to or extend to services performed by the authorised dealer or the customer themselves (e. g. installation, configuration, software downloads). [. . . ]