User manual SIEMENS LI44630/02 INSTALLATION INSTRUCTIONS

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SIEMENS LI44630/02. We hope that this SIEMENS LI44630/02 user guide will be useful to you.

Lastmanuals help download the user guide SIEMENS LI44630/02.


SIEMENS LI44630/02 INSTALLATION INSTRUCTIONS: Download the complete user guide (13839 Ko)

Manual abstract: user guide SIEMENS LI44630/02INSTALLATION INSTRUCTIONS

Detailed instructions for use are in the User's Guide.

[. . . ] This can be achieved if combustion air can flow through non-lockable openings, e. g. in doors, windows and via the airintake/exhaust-air wall box or by other technical measures, such as reciprocal interlocking, etc. If the air intake is inadequate, there is a risk of poisoning from combustion gases which are drawn back into the room. An air-intake/exhaust-air wall box by itself is no guarantee that the limiting value will not be exceeded. [. . . ] Intensive setting: Maximum power is obtained at the intensive setting P. It is only required for short intervals. Light Fan settings Intensive setting Light Fan settings 0 Light 1 2 Fan settings 3 6 Filters and maintenance Grease filters: Metal filters are used to trap the greasy element of the vapours that develop during cooking. Caution: As the filter becomes more and more saturated with grease, not only does the risk of it catching fire increase but the efficiency of the extractor hood can also be adversely affected. Important: By cleaning the metal grease filters at appropriate intervals, the possibility of them catching fire as a result of a build-up of heat such as occurs when deep-fat frying or roasting is taking place, is reduced. Cleaning the metal grease filters: In normal operation (1 to 2 hours daily), the metal grease filter must be cleaned 1 x a month. The filter must be placed loosely, and NOT wedged, in the dishwasher. Important: Metal filters that are saturated with grease should not be washed together with other dishes etc. When cleaning the filters by hand, soak them in hot soapy water first of all. Then brush the filters clean, rinse them thoroughly and leave the water to drain off. Removing and inserting the metal grease filters: Warning: The halogen bulbs must be switched off and cool. Press the catch on the grease filters inwards and fold the filters down. Even for some time after the bulbs have been switched off there is still a risk of burns. Replace the bulb (commercially available halogen bulb 230 volt, 28 watt, E 14 bulb holder). 3. Replace the halogen light bulb (conventional halogen bulb, 12 Volt, max. Plug the appliance into the mains or switch it on at the fuse box. 4. Note: If the light does not function, check that the bulbs have been inserted correctly. 10 Installation Instructions: Important information Old appliances are not worthless rubbish. Please contribute to a better environment by disposing of packaging materials in an environmentally-friendly manner. Please ask your dealer or inquire at your local authority about current means of disposal. The extractor hood can be used in exhaust air or circulating air mode. The width of the extractor hood must correspond to the width of the cooking area. Minimum distance between electric hob and bottom edge of extractor hood: 550 mm, Fig. The extractor hood must not be installed over a solid fuel cooker ­ a potential fire hazard (e. g. [. . . ] Attach the exhaust-air pipe to the reducing connector. Circulating-air mode With activated carbon filter if exhaust-air mode is not possible. The complete installation set can be obtained from specialist outlets. The corresponding accessory numbers can be found at the end of these operating instructions. 13 Prior to installation Preparing the wall The wall must be flat and perpendicular. plasterboard, porous concrete, Poroton bricks) use the appropriate fasteners. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SIEMENS LI44630/02

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SIEMENS LI44630/02 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag