User manual SIEMENS M46

[. . . ] May 2002, 18:13) Thank you for buying a Siemens mobile phone. This user guide is designed to familiarize you with all the functions of your new phone. While reviewing this guide, please pay particular attention to the safety (p. The wireless phone described in this guide is approved for use in GSM 1900. [. . . ] The keypad can also be directly locked and unlocked as follows: Device §Menu§ ¢ Setup ¢ Device ¢ Select a function. Language Set the language of the display text. When "automatic" is set, the language of your service provider is used. If a language that you do not understand happens to be set, the phone can be reset to the language of your service provider with the following input: © Siemens AG 2001, S:\Mobil\M46-usa\am_ohne Balken\MT50_Setup. fm *#0000# A Display Own greeting (p. 44) Illumination Can be switched on and off (switching it off increases the standby time). Big letters You can choose between two font sizes for the display. Contrast You can set the display contrast. 44) # Hold down. Key tones You can set the type of acoustic key tone: Click or Tone or Silent §Menu§ ¢ Setup ¢ Device ¢ Select a function. Status Fact. settings The phone is reset to the default values (factory setting) (does not apply to SIM card and network settings): Phone identity The phone ID (IMEI) is displayed. This information may be useful for customer service. Fast search *#9999#A M46 AM English, A31008-H7600-A1-1 (28. May 2002, 18:13) Setup When this function is active, network connection is speeded up (standby time is reduced). 67 Security The phone and SIM card are protected against misuse by several security codes. §Menu§ T9 input T9 preferred Activate intelligent text entry or deactivate it. Input language Select language in which the message is to be composed. Languages with T9 support are marked by the T9 symbol. §Menu§ ¢ Setup ¢ Security ¢ Select a function: Codes PIN control, Change PIN, Change PIN2, Change phonecode, see p. 16. Babysitter (Phone code protected) Only one number can be dialed. Hold down the right soft key on the the outside right (p. 23). © Siemens AG 2001, S:\Mobil\M46-usa\am_ohne Balken\MT50_Setup. fm ¢ Setup ¢ Device ¢ Select a function. Battery care This function allows the NiMH battery to be regenerated when the operating time drops (eliminating the memory effect). The battery is now fully discharged and recharged. Depending on the state of the battery, this can take up to 5 hours. Note No phone calls can be made during this process. The clock setting is retained. Allow only d (PIN 2/phone code protected) Dialing is restricted to the numbers in the Phonebook, new entries are not possible. [. . . ] 35 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Text entry. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Text entry with T9. . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Text message, SMS . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]