User manual SIEMENS PROFISET 30

[. . . ] EN Dear Customer, Gigaset Communications GmbH is the legal successor to Siemens Home and Office Communication Devices GmbH & Co. KG (SHC), which in turn continued the Gigaset business of Siemens AG. Any statements made by Siemens AG or SHC that are found in the user guides should therefore be understood as statements of Gigaset Communications GmbH. Sehr geehrte Kundin, sehr geehrter Kunde, die Gigaset Communications GmbH ist Rechtsnachfolgerin der Siemens Home and Office Communication Devices GmbH & Co. [. . . ] If the call is to be parked under a different connection code, the connection code must have been changed beforehand ( page 34). S and b Press the Programming key again and replace the handset. The call is now parked for a maximum period of 3 minutes. A call can only be parked, if is connected to the same S0 bus. Resuming a parked call You can resume a parked call from the same telephone or from a different telephone (it must be connected to the same S0 bus). Prerequisite: A call is parked and you are not conducting a call. Press the Programming key and enter the code "04" for "Parking/resuming a call" . The connection code is indicated on the display. If the call was parked under a different connection code, change the connection code beforehand ( page 34). S and c Press the Programming key again and lift the handset. You are now re-connected to the parked caller. You can cancel a programming procedure without making any changes by pressing the Disconnect key h !18 27. 11. 98 kap01. fm5 Profiset 30isdn engl. : A30853-X300-B107-1-7619 Convenient and secure telephone communication Locking your telephone You can lock your Profiset 30isdn against possible unauthorized use: q Total lock, only allows you to dial a preset direct station selection number (Programming direct station selection: page 26). Partial lock, only allows you to dial with the Destination dialling keys (Programming the destination dialling keys: page 25; Dialling call numbers using Destination dialling keys: page 10) and the Speed dialling keys (Programming the Speed dialling keys: page 25; Dialling call numbers using the Speed dialling key: page 11). Incoming calls are permitted. q a s T 0, 1 or 2 s or S Handset is on-hook. Enter the code "1" for total lock, "2" for partial lock or "0" for deactivating the lock. Press the Locking key or Programming key. The telephone is locked or the lock is deactivated. An activated lock (total or partial lock) is indicated via the symbol J on the display. The telephone can only be locked if the password is not set to 0000 (Defining the password: page 28). If the password is set to 0000 and the telephone was previously locked the lock is deactivated then. 19 27. 11. 98 kap01. fm5 Profiset 30isdn engl. : A30853-X300-B107-1-7619 Convenient and secure telephone communication DTMF signalling When a connection is set up, you can use the keypad to transmit DTMF signals (tones in dual-tone multifrequency), e. g. to control an answering machine remotely. The digits entered appear on the display for several seconds and the transmitted signals can be heard via handset or loudspeaker. Keypad signalling Instead of DTMF signalling, you can transmit keypad information elements (IE) e. g. [. . . ] 22 Exiting from a conference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 H Handset and loudspeaker volume . . . . . . . . . . . . . . . . . 30 I Initiating a callback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ISDN glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 K Keypad signalling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 L Labelling cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Location of the telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V Locking your telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Partial lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Total lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 M Main station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Multiple Subscriber Numbers (MSN) . . . . . . . . . . . . . 31 N National variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Number redial (automatic dialling) . . . . . . . . . . . . . . . . . 10 O On-hook dialling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Open listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 P Parking a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Point to point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Procedure in the case of malfunctions . . . . . . . . . . 45 Program the Multiple Subscriber Numbers . . . . . 4 Program the trunk code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Programming direct station selection . . . . . . . . . . . . 26 Programming the destination dialling keys . . . . 25 Programming the speed dialling key . . . . . . . . . . . . . 25 Programming the telephone settings . . . . . . . . . . . . 28 Putting into operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Q Quick reference guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 R Rejecting a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Rejecting call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Restoring the as-supplied condition . . . . . . . . . . . . . . 40 Restricted powering conditions . . . . . . . . . . . . . . . . . . . . . . . 4 Restricted powering switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Resuming a suspended call . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Ringer melody . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 51 27. 11. 1998 profi30. SIX Profiset 30isdn engl. : A30853-X300-B107-1-7619 Index S Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V Setting the national variants . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]