User manual SIEMENS VS08G

[. . . ] do not use the vacuum cleaner if it is damaged. Unplug the power cord from the mains if a fault is detected. Repairs and the fitting of replacement parts to the vacuum cleaner must only be carried out by the authorised after-sales service. Protect the vacuum cleaner from external weather conditions, moisture and sources of heat. [. . . ] To release the connection, press the unlatching sleeve and pull the handle out. Figure 3* a) Connect the floor nozzle and the telescopic tube together. B)Push the telescopic tube into the connecting piece of the floor nozzle until it engages. To release the connection, press the unlatching sleeve and pull the telescopic tube out. figure 4* To adjust the length of the telescopic tube , press the adjusting button/adjusting sleeve in the direction of the arrow and adjust the tube to the required length. Figure 5 a) Take the mains plug, pull the mains cable to the required length and insert the plug in a wall socket. B)If your unit has an electronically operated cable reel, the Ready indicator now lights up green. Figure 6 To switch your vacuum cleaner on and off, press the On/Off key in the direction of the arrow. You have bought an extremely powerful device. the highest suction setting is therefore only recommended for heavily soiled , durable carpeted and hard floors. Figure 8 Adjusting the floor nozzle: For cleaning rugs and carpets For cleaning hard floors Floor nozzle with carpet lifter* Figure 9* When you pull the floor nozzle backwards, the rug is lifted, allowing you to clean underneath the carpet edge. Figure 10 Pull the combination tool in the direction of the arrow to remove it from the tool holder. a) Crevice nozzle For vacuuming in crevices and corners. For difficult to get to places, the combination tool can be extended in two stages to 360 mm by pulling out the crevice nozzle. Extend the crevice nozzle to the second stop until you can hear it engage. To push the crevice nozzle together again, release the telescope lock (by pressing in arrow direction). Figure 11* When you stop cleaning for a moment, you can use the parking aid at the back of the vacuum cleaner. Slide the plastic lug on the nozzle connector into the groove at the back of the vacuum cleaner. If your cleaner has the automatic Off function, it will now switch itself off. When the work is done Figure 12 Switch the vacuum cleaner off and unplug the power cord from the mains. To reactivate or deactivate the cable brake, quickly tug the power cord. On vacuum cleaners with an electronically actuated cable rewind, the power cord automatically rewinds when the machine is unplugged at the socket. [. . . ] Can be used only in combination with HEPA filter (VZ151HFB) or micro-hygiene filter. If used with micro-hygiene filter, remove foam from filter frame (figure 19) and replace with active carbon filter. Combination of Hepa filter and active carbon filter not possible on units with motor protection grille. Floor nozzle with carpet lifter VZ081BD String remover (1/2) and polishing attachment (3) are available from customer services. [. . . ]