User manual SIEMENS WM260160

[. . . ] Safety instructions ­ The washing machine is heavy - take care when lifting. ­ Caution: frozen hoses can crack/burst. Do not install the washing machine outdoors or in areas exposed to frost. ­ The washing machine could be damaged. [. . . ] Please give the after-sales service the product number (E no. ) and the production number (FD) of the appliance. This information can be found: inside the washing machine door* / on the open service flap* and on the back of the appliance. Production number *depending on model Installation instructions en *521109* Electrical connection The washing machine must only be connected to an alternating current via a properly installed earthed socket. 1109 / 9000521109 The power supply and voltage indicated on the washing machine (rating plate) must be the same. The connected load and fuse required are specified on the rating plate. Make sure that: ­ the mains plug fits the socket, ­ the cable cross-section is adequate, ­ the earthing system is properly installed. The mains cable may only be replaced by a qualified electrician (if required). Replacement mains cables are available from customer services. Do not use multiple plugs/couplings or extension cables. If a residual current circuit breaker is used, only use a type which displays this symbol: , . Only this symbol guarantees compliance with the currently applicable regulations. Mains plug: ­ do not plug in to/pull out of the socket with damp hands. ­ when removing the plug from the socket, pull the plug body only, not the cable. ­ never pull the plug out during operation. Manufacturer Instruction manual Contents Safety instructions . . After transportation, the transport safety devices must be removed. Page 3. Product number To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into compartment II and start the Empty programme. You can rely on the competence of the manufacturer. This way, you can ensure the repair is carried out by trained service technicians who are equipped with genuine spare parts. Technical specifications Dimensions (width x depth x height) Weight Mains connection 60 x 59 x 85 cm 63 - 83 kg depending on model Nominal voltage 220-240 V, 50 Hz Nominal current 10 A Nominal power 2, 300 W 100-1000 kPa (1-10 bar) Page . 1 . 1 . 1 . 1 . 2 . 2 . 3 . 4 . 5 . 5 . 6 . 6 . 7 Water pressure Do not operate the washing machine until you have read these instructions. Please also observe the separate instruction manual. Keep all the documents in a safe place for future reference, or to pass on to the next owner. 5 6 7 Safety instructions ­ The washing machine is heavy - take care when lifting. ­ Caution: frozen hoses can crack/burst. Do not install the washing machine outdoors or in areas exposed to frost. [. . . ] Do not use multiple plugs/couplings or extension cables. If a residual current circuit breaker is used, only use a type which displays this symbol: , . Only this symbol guarantees compliance with the currently applicable regulations. Mains plug: ­ do not plug in to/pull out of the socket with damp hands. [. . . ]