User manual SIEMENS WS09X260HK

[. . . ] Operating and Installation Instructions en X 09·26 Table of Contents Operating instructions Information concerning waste disposal . Protection of the environment / hints and tips . Before using your washing machine for the first time . Preparing, sorting and loading the washing . [. . . ] The LED display shows remaining time and kvv" symbol during the washing cycle. i If you have accidentally changed the running programme, the childproof lock will ensure the machine work with original programme. The LED display shows the kvv" symbol only. Deactivating the childproof lock The childproof lock must be deactivated before making programme changes or ending programme with setting "(Rinse hold). q Press the M" Start/Pause button and hold on (for approx. 4 seconds) until the kvv" symbol goes out. The childproof lock cannot be deactivated if you have accidentally changed the programme. 23 Washing q Turn on water tap. Start programme q Turn the programme selector to the desired programme . d" indicator light flashes. q If required, press the button for additional option. The indicator light of the selected button is on. q If required, set the spin speed, Rinse hold function, washing temperature or start in time. 24 q Press the M" button. d" indicator light stops flashing and Q" indicator light comes on. The programme starts. Changing the programme If you have accidentally selected the wrong programme: q If the childproof lock is active, temporarily deactivate, see Page 23 . q Turn the programme selector to the desired programme. If you wish to prematurely end a programme: q If the childproof lock is active, temporarily deactivate, see Page 23 . q Turn the programme selector to Single Spin B"or Drain b ". d " indicator light stops flashing, B " indicator light is on. q After drain or spin cycle, remove the laundry from the machine. Cancelling the programme 25 When the programme has Ended m"indicator light flashes, the LED display shows qvp ". i If required: q Select an additional programme (" Spin B " or Rinse K "). q At the end of the programme option, turn the programme selector to Off . If Rinse hold " option was selected, the LED display shows ". If the loading door cannot be opened: Wait 2 minutes (safety function is active) or there is still water in the washing machine if the Rinse hold" option was selected. In the latter case, select the Drain b or Single spin B programme. Warning Remove any foreign objects (e. g. coins, paper clips) from the drum and rubber seal - risk of rust!q Leave the washing machine door and detergent drawer open to allow the interior of the washing machine to dry. Unload the laundry 26 Special applications Soaking q Load laundry of the same colour. [. . . ] All four appliance feet must be firmly on the ground. The lock nuts on all four appliance feet must be tightened against the housing. Attention Loud noises, vibrations and wandering" may be due to incorrect alignment! 46 Connecting the power Caution Connect the washing machine only to an alternating current via a correctly installed earthed socket. The mains voltage must correspond to the voltage specification on the washing machine (nameplate). [. . . ]