User manual SIGMA SPORT BC401

[. . . ] English Kit contents 1 SIGMA SPORT cycle computer BC 401 1 bracket with cable and sensor 1 magnet + casing (for assembly on the spoke) 1 small + 1 large black rubber band (use according to diameter of the handlebar A to mount the computer bracket) 1 grey rubber band (to mount the sensor) B Functions KMH Speed up to 300 kmh / 183 mph TRP* Trip distance up to 999. [. . . ] E DST and first figure of total distance are flashing (the power supply has been interrupted due to severe jarring) • Remove batteries, check contacts, clean if necessary • Re-enter DST, WS and CLK No speed display • Check that the cycle computer is properly engaged D in the bracket C • Check distance and position of the magnet • Check contacts, clean and bend if necessary • Check the cable for damage Blackening of the LCD display* Possible at temperatures above 60°C. lCD display is sluggish* Possible at temperatures under 0° C. * This does not impair the operation of the cycle computer. Between 1° and 60° C, the display returns to normal. Mountainbikes: Distance between sensor and magnet should be no larger than 5 mm. If necessary, move sensor and magnet closer to wheel center. Batteries and cable are not included in the warranty. The cycle computer has not been opened 2. [. . . ] DST ja kogudistantsi näidu esimene number vilguvad (elektritoide on häiritud tugeva raputuse tôttu) • Eemaldage patareid, kontrollige kontakte ja vajadusel puhastage need • Taassisestage DST, WS ja CLK D Puudub kiirusnäit • Kontrollige, kas kompuuter on korralikult kinnitatud toendi külge • Kontrollige magneti kaugust ja asendit • Kontrollige kontakte, vajadusel puhastage C ja pa inutage neid • Kontrollige, kas juhe pole vigastatud LCD ekraani tumenemine* On vôimalik kôrgematel temperatuuridel kui 60°C. [. . . ]