User manual SILENT KNIGHT 5670

[. . . ] SKSS Software Suite Model 5670 Installation and Operations Manual Part Number 151241 Rev F CD Key _______________ CD Key is not case sensitive Contents Introduction to SKSS . 5 Adding/Editing/Deleting Users and Passwords . 5 Setting Up Communications with the Panel . 6 Serial & USB Cable Direct Connection to the FACPs . [. . . ] This option is for 5820XL and IFP-1000Rev. 1. 2 and later, 5808, 5700, IFP-100, and IFP-50 panels. Upload event history from IntelliKnight, IFP-Series, or SK-5208 panels to the PC. Once the event history has been uploaded it can be viewed on screen and printed. Upload detector status from IntelliKnight and IFP-Series panels to the PC. You can print any of the file types from SKSS. When the file you want a report from is open, select Print from the File Menu. Prior to printing you can select Print Preview from the File menu to view the report onscreen. P/N 151241 9 5670 Silent Knight Software Suite Scheduling Jobs The panel and a PC can communicate with each other by downloading (computer sends data to the panel) and uploading (panel sends data to the computer). This section of the manual describes communication operations. The Communications Queue The Queue is a list of completed and scheduled tasks between panels and SKSS. When a task appears in the Queue window, its status and other information will display next to the account number. This panel is connected directly to the PC so no phone number appears. Describes the type of job that has been completed or is scheduled to occur. File name assigned on the PC where the information is downloaded from The status of these jobs is Waiting because they have been scheduled to happen at a later time. This panel is connected directly to the PC so no phone number appears. Figure 2: Communications Queue Example Delete Jobs from the Queue All jobs remain in the queue until you delete them. You can delete jobs that are finished and jobs that are scheduled. To delete a job from the Queue window: 1. Highlight the job you want to delete by clicking on it. Press on the [Delete] key or right click to select from the menu that appears, then click Delete. This action cannot be undone. 10 P/N 151241 Installation and Operations Manual Job Status Jobs or accounts listed in the Queue window are assigned a status. The chart below describes all possible status types. Table 3: Queue Job Status Status Waiting Error Processing Complete Aborted by User Timed Out Security Not Granted No Carrier or No Dialtone Modem Error Description The job is waiting for processing. Another job is currently being processed or the job is timed to execute at a later time. The job is currently processing, for example, sending or receiving data. Completed jobs remain on the queue until an operator deletes them. The job was cancelled during processing by an operator. Aborted by User jobs remain on the queue until an operator deletes them. [. . . ] You can also sort the file by various criteria and print the information that you need. 1. Once detector status has been uploaded, select Open Detector Status from the File Menu. You can scroll through the list of available files or enter the file name in the File Name area in the dialog box. Detector status files have the extension: . [Panel Type]Detector. [. . . ]