User manual SILVERCREST CRB-532

[. . . ] 1 Preliminary notes Thank you for selecting our Bluetooth car radio SilverCrest CRB-532. In order for you to utilise this device and all its options, we recommend that you read the corresponding instructions in this manual before initial use of the device, even if you are familiar with handling electronic devices. Please pay particular attention to the chapter "Important safety instructions" on page 71. Store this manual in a safe location for future reference. [. . . ] If there are several search results, they can be viewed by turning the control dial and pressing it to select one. To start the search without having entered all three letters, press the "BAND" button after entering the last search letter. The name of the first searched title with the searchable letter sequence appears on the display. If there is more than one file, you can have the different results shown on the display by turning the control dial . To start playback, briefly press the control dial again. Note: If the device is unable to find a matching search result, the message "AXX" will be displayed again 104 14. 9 Skipping forward or backward in increments of ten If you briefly press the station button "5" ahead, press the station button "6" . during playback, the device will skip back by ten tracks. If you want to skip ten tracks 14. 10 Pause English To suspend playback of the current title, press the PAUSE / station button "1" . Then playback of the current title is stopped until the PAUSE / station button "1" is pressed again or the device is turned off. 14. 11 Repeat functions (Repeat) If you want to continuously repeat the currently played track, briefly press the station button "2" during playback. The message "RPT" will be indicated on the display. To stop the repeat function, press the station button "2" again and the abbreviation RPT is turned off. Then the tracks will be played back in regular sequence. 105 14. 12 Intro To scan the titles on the storage medium, briefly press the station button "3" . The message "INT" will appear on the display. Then all tracks will be scanned for approximately ten seconds. To end the scanning function, press the station button "3" again and the abbreviation "INT" will turn off. Note: When the last track of an MP3 storage medium has finished, playback automatically starts again at the beginning. 14. 13 Random playback (random) To play back the tracks on the storage medium in random order, briefly press the station button "4" during playback. The abbreviation "RDM" will appear on the display. To end the function, press the station button "4" again, which will stop the random function. The message "RDM" will turn off. 14. 14 Turning the subwoofer on/off The device has a subwoofer output on its rear side. To activate this connection, press the "BAND" button for more than two seconds. To deactivate the output again, press the "BAND" button again for more than two seconds. 15 AUX IN The AUX IN is a connection with which you can connect external audio devices through their headphone or AUX output with this device. The audio tracks played back on these devices are then output through the car speakers. [. . . ] The operating panel is not inserted correctly. The connection cables have not been attached correctly. The device does not The radio has not been connected retain the stored correctly. Contacts 4 and 7 have not been connected properly or the vehicle manufacturer has assigned these in reverse. [. . . ]