User manual SILVERCREST DPF-710A

[. . . ] burning candles) are placed on or near the device; no foreign bodies are introduced into the device; 4 Digital Photo Frame DPF-710A English the device is not subject to any great temperature changes as this may cause moisture through condensation and short-circuit; the device is not subject to excessive shocks and vibrations; Power supply Use only the supplied power adapter model Targa KSUFB0500100W1EU to avoid overheating, deformation of housing, fire, electric shock, explosions and other dangers. Never connect this power adapter to other devices. Notice on Mains Separation: In order to completely disconnect the device from the mains, the power adapter must be pulled out from the wall outlet. For this reason, the device should be positioned in a way that assures unobstructed access to the power outlet so that the power adapter can be immediately pulled out in an emergency situation. [. . . ] 5 mm in order to support the photo frame weight safely. Please bear in mind that a suitable wall outlet should be located near the wall mount location. Pedestal Mounting In order to place the digital photo frame onto a table you will need to attach the supplied pedestal (D) onto the back panel of the device. Insert the pedestal into the hole (8) and turn it 90 degrees clockwise until it clicks into place. The asymmetrical shape of the pedestal makes it impossible to mount it in inverted direction. Once the pedestal is attached you can choose whether to place it horizontally or vertically on the table. i 8 Please note that the digital photo frame does not detect whether the pictures have been recorded in portrait (vertical) or landscape (horizontal) format. It might be necessary to optimise the picture by using a suitable image-editing programme on a computer. Digital Photo Frame DPF-710A Connecting English Insert the round-shaped plug (13) of the cable into the connection port (7) of the photo frame and the flat-shaped plug (12) of the cable (C) into the power out receptacle of the power adapter (B). Plug the power adapter into a wall outlet. Control Panel 1 2 3 4 5 6 Navigation up Navigation down Navigation right Navigation left Enter - Confirm Menu on/off 9 English Inserting the Memory Card Digital Photo Frame DPF-710A The built-in card reader can read the following memory cards (alphabetical order): Without adapter card MMC MMC Plus MS MS-Pro SD SD HC xD With adapter card Micro SD Mini SD MMC micro MMC mobile RS-MMC RS-MMC DV Insert a memory card (see table) into the card reader (10) at the bottom of the device until it fits in place. The memory card can only be inserted when its contacts point towards the photo frame front panel. To remove the memory card, simply pull it out. i 10 You can insert and remove the memory card while the device is powered on. If you insert a memory card while the unit is powered on, a summary of the pictures contained on the card will be displayed immediately. Digital Photo Frame DPF-710A Operation Powering the Device On/Off English Slide the On/Off switch (11) to the "On" position to power on the device or slide it to the "Off" position to power it off. Press right (3), left (4), down (2), up (1) to select the desired picture portion. Zooms the picture out (can be zoomed several times). This feature is available only when the current picture has been previously zoomed in. A picture can be zoomed out only till it reaches the original picture size. Rotates the picture 90 degrees clockwise. The rotation will not be saved, therefore the next time you view the picture it will appear as before rotation. Rotates the picture 90 degrees counter-clockwise. The rotation will not be saved, therefore the next time you view the picture it will appear as before rotation. 13 English Digital Photo Frame DPF-710A A safety prompt will appear. Press Enter (5) to confirm and to delete the picture. If the inserted memory card is write-protected the deletion cannot be executed. Opens the Preferences menu (see page 16 - Preferences). Displaying the Clock and Calendar Open the Clock and Calendar display by selecting the centre icon ( ) ­ see figure on page 11 - and press the Enter (5) button. [. . . ] When displaying pictures without any size adjustment (see page 16 ­ Preferences, Aspect Ratio) black bars will appear in the left and right picture margins. If you want to optimise the picture display on your photo frame it is necessary to crop the picture by using a suitable image-editing programme on your computer. Normally, this kind of programme is included in the package of most digital cameras. To crop the pictures many programmes offer a function "Selection Frame" or "Crop". [. . . ]