User manual SILVERCREST KH 1023 ELECTRIC KETTLE

[. . . ] Never place the kettle on hotplates or similar to heat water up. Use the kettle only with the supplied base!Voltage : 230 V ~ / 50 Hz Power consumption: 2200 W In older electrical installations, the building fuse (12A) may be activated due to the high power consumption. Ensure that the base with the electrical connections does not come into contact with water! [. . . ] If you do, you are taking a risk with your health! Before taking the appliance into use, ensure that . The appliance, the plug and the power cable are in good working order and. ­ the power cable been completely unwound from the holder on the bottom of the appliance, and that. Fill the appliance with water up to the MAX mark and let it come to a full boil once ­ as described in the next section. Pour this water away after the water has been boiled. Fill the appliance with water once again up to the MAX marking on the scale e and then bring it to the boil. Remove the plug from the mains power socket before you lift the kettle from its base t. This prevents causing a potential short circuit by water possibly spilling out of the carafe and falling onto live electrical connections in the base t. For safety reasons, the lid w should not be opened while the water is boiling or is very hot. There is a risk of receiving severe scalds. there are no user-serviceable elements inside. An open housing can create the risk of a lethal electrical shock. Never submerse any parts of the appliance in water or other liquids!You run the risk of a potentially fatal electrical shock should liquids come into contact with powered components. Should the scale deposits on the pourer sieve y be firmly settled, lay it in a water-vinegar solution, with a ratio of 6:1, for a few hours. the scale deposits will dissolve themselves. Rinse the pourer sieve y with copious amounts of clear water. Allow the appliance to cool down completely before putting it into storage. Wind the power cable around the holder on the bottom of the device. First, remove the plug from the mains power socket and allow the appliance to cool down completely. Clean the exterior surfaces and the power cable with a slighly damp cloth. [. . . ] In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, not for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial applications. [. . . ]