User manual SILVERCREST KH 1281 STEAM IRON

[. . . ] Never bend (kink) or crush the power cord. Arrange it in such a way that it can not come into contact with hot surfaces and such that no-one can step on it or trip over it. Always remove the power plug from the power socket after every use and when cleaning or filling. Always unroll the power cord fully before switching on and do not use an extension cord. [. . . ] Close the water reservoir filler opening y, making sure it "clicks" shut. To avoid any danger of suffocation, keep this bag away from babies and children. Plug the power plug into a power socket of 230 V~/50 Hz. Heat the steam iron for several minutes on the highest setting. Dry ironing without steam is possible at all temperatures, steam ironing is only possible from setting 2 (· Plug the power plug into a power socket of 230 V~/50 Hz. Should the care instructions for an article of clothing not mention ironing, (Symbol ), you should not iron that clothing article. You could otherwise cause damage to the clothing article. Check the care instructions on the labels of the clothing article whether and at which temperature the clothing article may be ironed. The control light for the temperature w lights up. When the control light goes out, the chosen temperature w has been reached. Wait until the temperature control light w goes out. This function is suitable for very dry, crumpled or creased materials. Never leave the steam iron unattended when it is hot or switched on. Only put the steam iron down on its standing foot e, fig. Remove the power plug from the power socket. Empty the water reservoir and clean the gliding sole r. Place the cool steam iron horizontally on a soft, clean base. In conventional steam irons, it is possible that at too low ironing temperature water begins to trickle from the gilding sole r. However, this iron possesses a new technical feature, namely the DRIP-STOP function, to switch off steam. The iron automatically switches off the steam ejection at low temperatures. A "CLICK" noise is heard when this happens. using the temperature rotary controller a , set the required temperature. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase date. Should a claim need to be made under the warranty, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. [. . . ]