User manual SILVERCREST KH 1908 ELECTRIC KETTLE

[. . . ] Lay the cable so that it cannot be trapped or otherwise damaged. Always heat water with the lid closed, otherwise the automatic cut-out may not function. Boiling water could then spray out over the rim. The boiler also becomes very hot during operation. [. . . ] First close the lid and then place the kettle onto the base 3, ensuring that it is is firmly seated on the base 3. Now insert the plug into the mains power socket. The control lamp integrated in the scale 4, as well as the control lamp in the on/off switch 2, indicate that the appliance is now heating itself up. The appliance switches itself off, and the control lamps go out, as soon as the water is on the boil. First remove the plug from the wall power socket before you lift the kettle from the base 3. This avoids the risk that any water splashing out could come into contact with live electrical connections in the base 3, which could cause a short circuit. Obtain any decalcifying agent suitable for kitchen utensils (e. Decalcifiers for coffee machines) from a hardware shop. For safety reasons, the lid should not be opened while the water is boiling or is very hot. There is a risk of receiving severe scalds. Press the retainer at the top of the pourer sieve 5 down and, at the same time, pull the pourer sieve 5 inwards. Clean the pouring sieve 5 with a lightly moistened dishcloth and under running water. there are no user-servicable elements inside. An open housing can create the risk of a lethal electrical shock. Never submerse any parts of the appliance in water or other liquids!This can create the risk of a life-threatening electrical shock if residual liquid comes into contact with powered components. Should the scale deposits in the pourer sieve 5 be firmly established, lay it in a water-vinegar solution having a ratio of 6:1 for a few hours. the scale deposits will dissolve themselves. Rinse the pourer sieve 5 with lots of clear water. Before cleaning the appliance, remove the plug from the mains power socket and allow the appliance to cool down. Clean the exterior surfaces and the power cord with a slighly damp cloth. Be sure to dry the appliance well before taking it back into use. [. . . ] The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The warranty period will not be extended by repairs made under warranty. this applies also to replaced and repaired parts. [. . . ]