User manual SILVERCREST KH 2021 MULTI-BAND RADIO

[. . . ] Take note that in some countries, different national regulations may apply with regard to the radio frequency ranges that may be freely received. Please note that information received from outside of the assigned radio frequency ranges may not be exploited, passed on to third parties or otherwise misused. ⷠTransportable world receivers are used in a wide range of climate zones. Pay heed, especially when used outdoors, that the climatic restrictions (see Technical data) are not exceeded. [. . . ] Open the battery compartment on the rear of the appliance and insert two batteries as shown on the markings next to the battery compartment. When a battery symbol appears in the display ´, always replace both batteries with the types detailed under Technical Data. In this regard, also take note of the notices contained in the sections "Maintenance" and "Disposal". b) Connecting the mains adaptor: A mains adaptor is not supplied. If you have one available that conforms with the specifications given under Technical Data: · Unfold the telescopic aerial ³ and draw it out to its full length. ⷠPush out the support if you wish to position the appliance at an angle. If you have switched the appliance on using the receiving mode button "AM ON"», first of all select either the reception range MW (Medium Wave) or SW 1-7 (Short Wave). For this, push the waveband selector ¿ into the relevant position. ⷠThen search for the desired radio station by slowly turning the tuning re-gulator "TUNING" until you have clear reception. In the display ´ the frequency just received is shown digitally, together with the unit "MHz" (Megahertz) or "kHz" (Kilohertz). The appliance can switch itself on under timed control, e. Additionally, a radio station should be selected and a sufficiently loud volume level be set. When everything is programmed as described, the appliance switches itself on automatically at the programmed alarm time. Note: For as long as the alarm function remains activated, the appliance will repeat the switch on function every day. Keep this in mind if the appliance is to be left without supervision for an extended period ­ if you do not, the appliance will continue to run until your return, or until the batteries are exhausted. Clean the appliance with a dry or lightly moistened cloth only. To avoid potential damage to the upper surfaces, do not use any detergents or abrasive cleaning agents. ⷠTo protect the appliance against scratches and soiling, store it in the supplied storage bag. If you do not intend to use the appliance for longer than a year, remove the batteries. Apart from the battery compartment, NEVER open any of the covers on the device. In the event of malfunction or apparent damage, make contact with Customer Services. Leaking batteries can cause damage to the appliance: If you do not intend to use the appliance for an extended period, remove the batteries. [. . . ] Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]