User manual SILVERCREST KH 2022 MULTI-BAND RADIO

[. . . ] Take note that in some countries, different national regulations may apply with regard to the radio frequency ranges that may be freely received. Please note that information received from outside of the assigned radio frequency ranges may not be exploited, passed on to third parties or otherwise misused. Transportable world receivers are used in a wide range of climate zones. Pay heed, especially when used outdoors, that the climatic restrictions (see Technical data) are not exceeded. [. . . ] When a battery symbol appears in the display ´, always replace both batteries with the types detailed under Technical Data. In this regard, also take note of the notices contained in the sections "Maintenance" and "Disposal". b) Connecting the mains adaptor: A mains adaptor is not supplied. If you have one available that conforms with the specifications given under Technical Data: · Unfold the telescopic aerial ³ and draw it out to its full length. Push out the support if you wish to position the appliance at an angle. With the sliding switch "HOLD" you can block all buttons against adjustment (ON), or have them free for adjustment (OFF). b) Adjusting the reception · If you have switched the appliance on using the receiving mode button "AM ON"», first of all select either the reception range MW (Medium Wave) or SW 1-7 (Short Wave). For this, push the waveband selector ¿ into the relevant position. Then search for the desired radio station by slowly turning the tuning regulator "TUNING" until you have clear reception. In the display ´ the frequency just received is shown digitally, together with the unit "MHz" (Megahertz) or "kHz" (Kilohertz). With FM reception you can make adjustments to the reception sensitivity. Slide the switch "LOCAL/DX" to the position "LOCAL" if you only want to receive powerful local transmissions. The appliance can switch itself on under timed control, e. Additionally, a radio station should be selected and a sufficiently loud volume level be set. When all steps have been completed as described, the appliance automatically issues the alarm call at the programmed time, until it switched back off. For as long as the alarm function remains activated, the appliance will repeat the switch on function every day. Keep this in mind if the appliance is to be left without supervision for an extended period ­ if you do not, the appliance will continue to run until your return, or until the batteries are exhausted. Clean the appliance with a dry or lightly moistened cloth only. To avoid potential damage to the upper surfaces, do not use any detergents or abrasive cleaning agents. To protect the appliance against scratches and soiling, store it in the supplied storage bag. If you do not intend to use the appliance for longer than a year, remove the batteries. Apart from the battery compartment, NEVER open any of the covers on the device. [. . . ] The device must be packaged securely for transport and the RMA number must be directly visible. Shipments without an RMA number can not be processed. Parts subject to wear and tear · damage to breakable parts such as switches and rechargeable batteries. The product is only designed for private and not commercial use. [. . . ]