User manual SILVERCREST KH 206 WIRELESS DOORBELL

[. . . ] If a battery is swallowed, medical assistance must be sought IMMEDIATELY. Never open batteries, never solder or weld batteries. If you do not intend to use the appliance for an extended period, remove the batteries. Do not use any aggressive chemical substances for cleaning. [. . . ] The precondition for this is that the transmitter and receiver within a system are working on the same frequency. For this, you must synchronise the appliances as follows: Press the synchronisation button on the receiver The red signal indicator q now glows. If the synchronisation has been a success, the receiver notifies you of the programmed call signal. the appliances terminate the synchronisation mode and the signal indicator q goes out. Should the receiver not react as described, repeat the synchronisation. The transmitter shows, with a brief glowing of the indicator f when being activated, the transmission of the signal to the receiver. Installing the appliance Select a suitable positioning for the transmitter, close to your outer door. Using the assembly plate h of the transmitter, mark the positions required for the two boreholes (spacing approx. 68 mm) and then bore the holes for the enclosed wallplugs. Screw the assembly plate h onto the wall. Write the name(s) of the residents on the nameplate d and then place the plastic covering. Place the transmitter on the assembly plate h and secure it, with the enclosed small screw, to the assembly plate h. You can install the receiver at a suitable location either suspended by its loop o or make use of the stand u. Bear in mind that the given range refers to the free-space range. If being utilised in a building, this range is reduced quite distinctly. To suspend the receiver, fix the enclosed screw, with the wallplug, at a suitable location on the wall and hang the appliance from it. In the event of malfunction or apparent damage, make contact with Customer Services. If the appliance is not to be in use for an extended period, remove the batteries. NEVER submerse the appliance or its components in water or other fluids! â· Do not allow any liquids to penetrate into the appliance housing. If they do, there is a risk that the appliance could be damaged. Cleaning the appliance: Clean the appliance only with a dry or lightly moistened cloth. [. . . ] Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]