User manual SILVERCREST KH 2156 UNIVERSAL REMOTE CONTROL

[. . . ] Universal remote Control 3a KH 2156 Universal remote Control operating manual KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM www. kompernass. com ID-Nr. : KH2156-08/09-V3 08/2009 KH 2156 INDEX Important safety instructions Device summary Initial use Unpacking the device / checking the package contents Inserting the batteries Operating components LCD display Buttons SETUP - System settings Code Setup (Programming the remote control) Programming by brand code search Programming by manual code input Programming by automatic code search System-Setup Setting the time Setting the date Adjust contrast Background Illumination System reset Timer Setup Sleep timer Event timer Learn Setup Code learn function Macro Setup Favourites channel Volume control Vol +/--, (Mute switching) For operation All OFF Faults / Remedies Disposal CE- Conformity Importer Technical data Important Warranty Notices PAGE 2 3 4 4 4 5 5 6 8 10 10 11 11 13 13 13 14 14 14 15 15 15 16 16 17 19 20 20 21 21 21 22 23 23 23 23 -1- Universal remote control KH2156 Read the operating instructions carefully before using the device for the first time and preserve this booklet for later reference. Pass this manual on to whoever might acquire the device at a future date. Important safety instructions Proper use Children may only operate the remote control under adult supervision. The universal remote control can replace a maximum of ten remote controls. It can only be used for entertainment electronics with infrared receivers. [. . . ] Set with the or button t the desired value from 1 to 99 minutes. Position the remote control in such a way that your infrared signal can reach the device to be switched off. After expiration of the set time the remote control will switch the device off. To check if the SLEEP timer is activated press the S button r. Then below to the left in the LCD display q "SL" will be shown. Event timer The remote control has 4 event timers available via which you are allowed to send out specific series of button combinations at designated times. 1. Hold down the S button r for a little longer than 3 seconds. The notice "CODE SETUP" appears. 2. With the or button t select "TIMER SETUP" and confirm with the OK button k. "TIMER SLEEP" appears in the LCD display q. With the or button t select the desired memory slot "TIMER SETUP 1" to "TIMER SETUP 4" and confirm with the OK button k. Now the hour of the time of day, to which the desired button combinations are to be carried out, blinks. Set with the or button t the desired hour and press for confirmation the OK button k. Now the minutes of the time of day, to which the desired button combinations are to be carried out, blinks. Set with the or button t the desired minutes and press for confirmation the OK button k. 5. In the LCD display q you will see "TIMER X KEY" (X stands for the desired timer). Now press the desired device button e followed by the desired sequence of the button commands. 6. Press the S button r to save your entry and to return to the timer menu. Procede in a similar manner in order to, if required, programme the other timer memory slots also. - 15 - Tips: 1. Per timer memory slot a maximum of 14 buttons can be programmed. After entry of the 14th button the sequence will be automatically saved and "FULL" is shown in the LCD display q. In this menu also the device will return to the standard display after approx. 15 seconds without an entry. Learn Setup The Universal remote control (URC) can learn and save button signals of an original remote control. If the URC does not work after applying the programming methods already described or cannot carry out all commands please attempt to teach the URC with the help of the original remote control. · Use new batteries for the URC and the original remote control. [. . . ] The URC stops reacting after a button is pressed. > The batteries must have enough voltage and be properly installed. > The batteries must have enough voltage and be properly installed. Increase the contrast setting. Disposal Do not dispose of the device in your normal domestic waste. [. . . ]