User manual SILVERCREST KH 2173 BATHROOM RADIO

[. . . ] If you do not intend to use the appliance for an extended period, remove the batteries ­ batteries can discharge themselves and then leak. ⷠShould the batteries leak: Clean the battery compartment with a dry cloth whilst wearing protective gloves. Keep batteries and cells away from small children. Should a battery be swallowed, seek medical attention IMMEDIATELY, as life is at risk. [. . . ] The letter "A" after the figure means "AM" (mornings), "P" means "PM" (afternoons). ⷠPress the button MODE once again, so that only the figures for the minutes are shown in the display (e. Press repeatedly on the button SET until the minute figure is correctly shown, e. Press the button MODE once again, until only the number for the month is shown in the display, e. Press repeatedly on the button SET until the figure for the month is correctly shown, e. Press the button MODE once again, until only the number for the day is shown in the display, e. Press repeatedly on the button SET until the figure for the day is correctly shown, e. Press the button MODE once again, until only the number for the hours is shown in the display, e. Ensure that the indicator "AL" does not appear, as you would then be setting the alarm time, not the time display itself. ⷠPress repeatedly on the button SET until the hour figure is correctly shown, e. The letter "A" behind the number indicates "AM" (morning), "P" indicates "PM" (afternoons) and "H" signifies a 24 hour time display. ⷠPress the button MODE once again, until only the number for the minutes is shown in the display, e. Ensure that the indicator "AL" does not appear, as you would then be setting the alarm time, not the time display itself. ⷠPress repeatedly on the button SET until the minute figure is correctly shown, e. To switch the alarm function on, repeatedly press the button SET until three lines are shown above the double-point in the display. To switch the alarm function off, repeatedly press the button SET until the three lines are no longer shown. ⷠTo have a signal tone sound on every full hour, press repeatedly on the button SET until a bell symbol appears in the display below the doublepoint. To switch the hourly signal tone function off, repeatedly press the button SET until the bell symbol is no longer shown. Using the button SET you can flip through all adjustments. When everything is programmed as described, a signal tone will sound at the scheduled alarm time and continue until you press any button. For as long as the alarm function remains activated, the appliance will repeat the alarm notification every day. Clean the appliance with a dry or lightly moistened cloth only. [. . . ] The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manu-factured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. [. . . ]