User manual SILVERCREST KH 2218 PROJECTION ALARM CLOCK

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. Pass this booklet on to whoever might acquire the appliance at a future date. All rights including those of photographic reproduction, duplication and distribution by means of particular methods (for example data processing, data carriers and data networks), wholly or partially as well as substantive and technical changes are reserved. Warning A warning of this danger level signifies a possible dangerous situation. [. . . ] Press the button SNOOZE f to switch the daylight saving time for the selected time zone either on or off . If you have activated the summer daylight saving time, it is automatically switched off when the appliance receives an RDSSignal. Pressing and holding one of the buttons changes the indicator faster. Also here, the above listing of programmable cities and their time difference is valid. Press the SNOOZE button to switch the summer daylight saving time either on or off for the selected time zone. Programme the reminder function You can programme in up to 10 dates on which the appliance can give you a reminder when they arrive. Press the buttons UP/DOWN g/d to programme in the first desired memory date. Pressing and holding one of the buttons changes the indicator faster. If you press the SNOOZE button f, the year number will be deactivated and you will thus receive a reminder on this date every year. Should you wish to programme in further dates, press the Page button a to select a memory slot from 2-10. To deactivate the memory function, programme in a date that lies in the past. Programme the Update function With this function the appliance can automatically up-date the time by using RDS-Data. Press the buttons DOWN/UP g/d to adjust the time span for the switch off timer to between 01 and 59 minutes. Press the button UP d to return to the 24 hour modus. In the adjustment "OFF" the projection is permanent and can be switched off by pressing the PROJECTION button r once again. Press the MODE button y once again to close adjustment. Using the buttons DOWN/UP g/d set the desired time interval (a time span between 1 minute and 23:59 h is possible). When the time has lapsed, the Timer signal sounds for approx. If you wish to end the Timer function before the alarm, press and hold the button USER|NAP i for one second. Alarm function (Alarm 1 to 4) You can programme in up to four alarm times on your radio alarm. If a button is not pressed within approx. 15 seconds, the appliance saves the adjustment and then leaves the programming mode. [. . . ] This product is subject to the provisions of European Directive 2002/96/EC. disposing of the appliance · Arrange for the product, or parts of it, to be disposed of by a professional disposal company or by your communal waste facility. In case of doubt, please contact your waste disposal centre. disposal of batteries/accumulators · Used batteries/rechargeable batteries may not be disposed of in household waste. [. . . ]