User manual SILVERCREST KH 2314 DAB-RADIO

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. This device complies with the fundamental requirements and other relevant prescripts of both the EMC Guidelines 2004/108/EC and the Guidelines for Low Voltage Devices 2006/95/EC. For DAB transmission several audio data torrents (transmission channels) are brought together into a so-called Ensemble resp. Multiplex or a block with a higher bit rate. [. . . ] Thereafter, the search advance is represented from 0 - 100% by a progress bar. At the end of the search run the number of transmitters found is briefly displayed (X Services found). With the first switching on of the radio the scan mode Station Search starts automatically. Should a station already have been received, the radio starts with the last tuned station. If you wish to conclude the station search prematurely, turn the multi adjustor VOLUME/SELECT. To call up a found transmitter, press the button JOG MODE/SELECT. Turn the multi adjustor VOLUME/SELECT to the left or right to show the various stations, one after the other. When the sought after station name is indicated in the display, press the button JOG MODE/SELECT. Appears briefly, after this the sender group is shown once again. Unlike an analog radio, with DAB several stations (an Ensemble or Multiplex) are bundled together to a station group and transmitted on one frequency. When the radio has found a station group, the name of the station and the station group are shown in the display. 3 Turn the multi adjustor VOLUME/SELECT slowly, and with pauses, to the left or right in order to switch through the various DAB channels for the sender groups (5A - 13F). When a sender group is found in a DAB channel, the name of the group is indicated in the lower display line. To select a found sender group, press the button JOG MODE/SELECT. The first found sender of this sender group appears and, next to it, the transmitter number/the total number of available senders. Turn the multi adjustor VOLUME/SELECT slowly, and with pauses, to the left or right. In this way the saved senders in this sender group can be switched through. You can choose between two different station search methods: Quick Scan and Full Scan. Quick Scan searches only for the frequencies used in most countries. This function can be used to search for new stations and is quicker than the Full Scan search. full Scan examines all frequencies in the DAB III Band. When the station search is finished, the transmitter found first is shown in the display. [. . . ] After the resetting of the adjustments from the FM mode, the frequency 87, 5 MHz is reproduced. When resetting the adjustments, all saved radio stations are erased!You can programme in two alarm times, and then be woken by either the DAB radio, FM radio or one of two different alarm signals. Turn the multi adjustor VOLUME/SELECT to programme in a sound volume (Volume Level) from 1-20. [. . . ]