User manual SILVERCREST KH 2381 CAR RADIO

[. . . ] Read the operating instructions carefully before using the appliance for the first time and preserve this booklet for later reference. This device is designed for the reception of FM/AM radio stations as well as for the playback of audio and MP3-CDs, MP3 and WMA data from USB data carriers and SD/MMC memory cards and also audio signals from external audio devices. This device is intended for use only in private environments. It is not suitable for use in commercial or industrial areas. [. . . ] To reset the car radio to its factor default settings, press the RESET button with a pointed object, such as a pen. Reset the car radio: - at initial operation, - after the cable connection, - if not all function buttons are working - when an error message appears in the display. Turn the multi controller to set the record format for recording on SD/MMC and/or USB data carriers, MP3 (MP3 data) or WMA (Windows Media Audio). Via the multi controller you can also adjust settings for the switch on volume, time of day settings, traffic radio volume, EON function, recording format and the equalizer. 2 seconds and then press it several times to access the following settings: When the DSP equalizer is on, the settings for BASS and TREBLE are not available. Turn the multi controller in order to set a volume level, which will apply when the car radio is switched on. By pressing one of the station buttons 1-6 you access the saved station again. When the search is completed, each of the identified stations is played for roughly 1 second. With the station search only stations of the currently selected PTY identification (see the PTY identification table) will be considered. Hold down the PTY button and then turn the multi During the display of a PTY identification if you press briefly the PTY button or the buttons / a search immediately starts for stations, which correspond to this PTY identification. If no station is found that corresponds to this PTY identification the notice NOT FND appears briefly and then the search ends with the last set station. For this function the EON function must be switched on. In the TA mode the device will immediately switch from other stations or operation types to the radio station, which is currently broadcasting traffic information. With this the volume level entered under TAVOL will be set. The TA function can be stopped during the playback of traffic information, without switching off the TA mode, by pressing the TA button again. Push the CD into the CD slot with the inscribed side facing up. ⷠLock the face plate back into place by folding it upwards. Immediately remove the CD from the CD slot. If an ejected CD is not removed within approx. 5 seconds the device will draw it back in, however playback of the CD will not start. This function serves to compensate for vibrations, for example on uneven streets, and to provide an uninterrupted playback even with device movement. When the device is switched on the memory automatically fills with data: ­ with audio CDs for 10 seconds; ­ with MP3-CDs for 120 seconds. [. . . ] Ensure that moisture cannot permeate into the device during cleaning!The radio and/or the automatic station memory is not functioning Moisture penetrating into the device creates the risk of electric shock!Besides which, the device could become irreparably damaged! Station memory is not functioning The connection 7 in the ISO block A (Permanent positive) is not connected correctly. [. . . ]