User manual SILVERCREST KH 2610 NEGATIVE DIGITISER

[. . . ] The manufacturer assumes no responsibility for damage caused by failure to observe the instructions, improper use, inappropriate repairs, making unauthorized changes or for using unapproved replacement parts. In the current operation instructions the following warnings are used: WARNING A warning of this danger level signifies a possible dangerous situation. If the dangerous situation is not avoided it can lead to injuries. The directives in this warning are there to avoid personal injuries. [. . . ] System prerequisites You will need a computer with a vacant USB port and with the operating system Windows® XP, Windows® Vista or Windows® 7 from the Microsoft® corporation. Installation of the drivers and the ArcSoft PhotoImpression 6 programme NOTICE In these operating instructions only the programme sections are described that you will need for scanning your slides and/or film negatives. You can find further information in the programme's on-line help. the illustrations and descriptions refer to the operating system Microsoft® Windows® Vista. The illustration depictions can differ, depending on the display settings, with other operating systems. NOTICE If you have switched off the autostart function and the installation process does not begin automatically you can start the installation process by double clicking on the file "autorun. The window for language selection will be displayed. When the device is connected for the first time the window "New hardware found" will be shown. NOTICE If you want to connect the device to another USB port the window "Device software installation" will be displayed. In this chapter you receive important information for the handling and operation of the device. Release the fastener on the front of the film holder 5 and open the holder. insert the film strip into the holder correctly orientated. Close the holder making sure that the cover locks into place. Release the fastener on the front of the slide holder 6 and open the holder. insert a maximum of 3 framed slides , correctly orientated , into the holder. Close the holder making sure that the cover locks into place. Click on the button "Open photo" in the icon bar and then on the menu input "Receive from film scanner". The device will be automatically calibrated with the first programme start after installation. After completion of the calibration the programme window will be displayed. The window "Capture from scanner" will be displayed. Carry out the necessary settings: File format, quality (only with JPG files), memory location, film type, colour depth, scan resolution NOTICE JPG files can only be generated with a colour depth of 24 bits. Slide the holder with the film strips and/or slides to be scanned into the slot 3 on the device until it locks into place. [. . . ] This product is for private use only and is not intended for commercial applications. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. Your statutory rights are not restricted in any way by this warranty. The guarantee period will not be extended by the warranty. [. . . ]