User manual SILVERCREST KH 5527 HAIR STRAIGHTENERS

[. . . ] Always remove the power cable from the socket by pulling on the plug, NOT on the power cable. Do not wrap the power cable around the appliance and protect it from being damaged. To avoid risks, arrange for defective power cables and/or plugs to be replaced immediately by qualified technicians or our Customer Service Department. Do not pinch or squeeze the power cable and lay it in such a way that no one can tread on or trip over it. [. . . ] The 5th red LED, high heat level, for very robust hair. The 3rd red LED, lower heat level, for normal hair. The 2nd red LED, very low heat level, for fine hair. One red LED blinks, minimal heat level, for very fine hair. When the running light progresses to the selected heat level, double press the On/Off 5 button. The buttons are now lokked, the temperature cannot be changed by an unintentional pressing of the buttons "+" 4 or "-" 4. Clamp the hair strands between the hotplates 2 and close to the skin, then press them together. Pull the whole of the hair strand through the hotplates 2, in that you pull the hair straightener downwards. Repeat the process with each individual strand. When you have smoothed all of the strands, double press the On/Off 5 button to release the temperature lock. Press the On/Off 5 button until the LED Indicator 3 goes out. Remove the plug from the wall power socket. When you want to release the temperature lock, once again double press on the On/Off 5 button. The green LED goes out, the button lock is released. Wait until the running light in the LED Indicator 3 glows permanently up to the programmed temperature. Prepare the hair as described in "Before straightening/ Before curling". Start with the lower hair sections at the back of the head. Ensure that the hotplates 2 do not make contact with the skin of the head. Clamp the end of hair strand between the hotplates 2 and press them together. Turn the combi hair styler to wrap the hair strand around the hotplate. Dependant on hair type and adjustment, wait a few seconds. Prepare the hair as described in "Before straightening/ Before curling". [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. Only in this way can a post-free despatch for your goods be assured. [. . . ]