User manual SILVERCREST KH 1115

[. . . ] Do not insert sharp or hard objects into the thermal jug. Do not put your hand into the thermal jug. These actions could cause damage to the appliance or personal physical injury. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. [. . . ] The lid 9 is now secured and cannot fall off. All of the water that is in the water tank 1 passes through the coffee maker. Should you wish to stop the brewing process you must disconnect the plug 6 from the power socket. You can extract the thermal jug 0 and serve the coffee when the red indicator light has extinguished. You do not have to remove the lid 9 from the thermal jug 0 to pour coffee. with the lid 9 secured , press on the pouring lever 8 and hold it down. When you have finished pouring, release the pouring lever 8 . Swing out the filter holder 4 and insert a filter bag (Size 1x4) with the sides folded. Put coffee powder into it (medium to fine ground). For one cup of coffee you will require about one measuring spoon q of coffee powder. Subject to taste, the amount of coffee powder can vary. Should you wish to keep the coffee warm in the thermal jug 0 for an extended period, remove the thermal jug 0 from the coffee maker when the brewing process is finished. When the thermal jug 0 is standing in the coffee maker the lid 9, due to the brewing mechanism, is pressed down. As soon as the brewing process is complete, hot air escapes through the lid 9. When the thermal jug 0 is removed from the coffee maker, the lid 9 closes itself automatically. After you pour water in the water tank 1 for further brewing processes, allow the coffee machine to cool down for approx. To clean the lid 9, it must be dismantled: Always remove the plug 6 from the power socket before cleaning the appliance. Before you clean the coffee maker you MUST remove the plug 6 from the power socket. Always wait until the coffee maker has cooled down before cleaning it. Wipe the housing of the coffee maker and the thermal jug 0 with a soft cloth lightly moistened with a soapy solution. After every brewing process remove the filter bag from the filter bag holder 4. remove the filter and rinse the filter bag holder and the thermos jug 0 under running water. [. . . ] This product is for private use only and is not intended for commercial applications. The warranty will become void in the event of abusive and improper handling, use of force and internal tampering not carried or approved by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. The coffee is too strong/too weak: There is too little/too much water in the water tank 1. [. . . ]