User manual SILVERCREST KH 2022

[. . . ] Take note that in some countries, different national regulations may apply with regard to the radio frequency ranges that may be freely received. Please note that information received from outside of the assigned radio frequency ranges may not be exploited, passed on to third parties or otherwise misused. ⷠTransportable world receivers are used in a wide range of climate zones. [. . . ] b) Connecting the mains adaptor: A mains adaptor is not supplied. If you have one available that conforms with the specifications given under Technical Data: · Unfold the telescopic aerial ³ and draw it out to its full length. ⷠPush out the support if you wish to position the appliance at an angle. With the sliding switch "HOLD" you can block all buttons against adjustment (ON), or have them free for adjustment (OFF). b) Adjusting the reception · If you have switched the appliance on using the receiving mode button "AM ON"», first of all select either the reception range MW (Medium Wave) or SW 1-7 (Short Wave). For this, push the waveband selector ¿ into the relevant position. ⷠThen search for the desired radio station by slowly turning the tuning regulator "TUNING" until you have clear reception. In the display ´ the frequency just received is shown digitally, together with the unit "MHz" (Megahertz) or "kHz" (Kilohertz). With FM reception you can make adjustments to the reception sensitivity. Slide the switch "LOCAL/DX" to the position "LOCAL" if you only want to receive powerful local transmissions. The appliance can switch itself on under timed control, e. Additionally, a radio station should be selected and a sufficiently loud volume level be set. When all steps have been completed as described, the appliance automatically issues the alarm call at the programmed time, until it switched back off. For as long as the alarm function remains activated, the appliance will repeat the switch on function every day. Keep this in mind if the appliance is to be left without supervision for an extended period ­ if you do not, the appliance will continue to run until your return, or until the batteries are exhausted. Clean the appliance with a dry or lightly moistened cloth only. [. . . ] If it is not possible to deal with your complaint by phone, they will provide · a processing number (RMA number) and · An address where you can send your product for repairs under the warranty. If you send the device please enclose a copy of the proof of purchase (till receipt). The device must be packaged securely for transport and the RMA number must be directly visible. [. . . ]