User manual SILVERCREST KH 2199

[. . . ] Never open the housing of the device or of the mains power adapter (not supplied) and do not attempt to repair the device yourself, it does not contain any user-serviceable elements. This device is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the device is to be used. ⷠChildren should be supervised to ensure that they do not play with the device. Place the device in an open and well-ventilated area so that heat pockets cannot be created within it. [. . . ] Insert the three batteries into the battery compartment k, paying heed to the polarity markings shown in the battery compartment k. Close the cover, ensuring that it engages. Place the projection clock onto a level surface. ⷠPosition the projection clock such that the projection lens q is directed onto an empty surface. The distance from the projection lens to the projection area (ceiling or wall) must lie between 0, 4 m and 3 m. Connect the external mains adaptor This device can be operated with an external mains adaptor. Please use only mains adaptors that meet these specifications: Input voltage: 230 V ~ 50 Hz Output voltage: DC 3V (+/- 5%) Rated current: min. 300 mA Polarity: Attention: Make certain that the polarity is correct ­ both for the batteries as well as for the mains adaptor. To switch on, turn the volume controller OFF/BUZZ/VOLUME o until an audible »Click« is heard. Using the volume controller OFF/BUZZ/VOLUME o now set the desired sound volume level. The frequencies can be read off from the frequency scale s. To switch off, slide the switch ALARM ON/OFF/AUTO e into the position "OFF". Note: The radio is only switched off when the switch ALARM ON/OFF/AUTO e is at the positions OFF or AUTO. To simply turn the sound volume regulator o to very quiet, until a »Click« is heard, is not sufficient. As soon as you have found a position with good reception from your desired radio station, leave the telescope aerial w in this position. Release the button HOUR j as soon as the desired hours setting is shown in the display i. Release the button MIN h as soon as the desired minutes setting is shown in the display i. Release the button HOUR j as soon as the desired hours setting is shown in the display i. Release the button MIN h as soon as the desired minutes setting is shown in the display i. Using the sound volume controller OFF/BUZZ/VOLUME o now set the desired sound volume level. If you do not touch any other buttons while the alarm is sounding, after about a minute the radio switches itself off. The radio gives its next alarm call on the following day at the programmed time. [. . . ] Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]