User manual SILVERCREST KH 2389

[. . . ] Table of content Introduction For your personal safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Proper Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Scope of Delivery / Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Insert the white plug of the second Cinch connecting cable until it catches into the LINE IN L-Cinch plug jack (white / left) ft. Then insert the second white plug of the second Cinch connecting cable until it catches into the LINE OUT R-Cinch-plug-jack (white / left) of the CD changer. Insert the red plug of the third Cinch connecting cable until it catches into the REAR Cinch R plug jack (loudspeaker connection (red / rear right)) fu. Then insert the second red plug of the third Cinch connecting cable until it catches into the REAR Cinch R plug jack (loudspeaker connection (red / rear right)) of the final amplifier. Insert the white plug of the fourth Cinch connecting cable until it catches into the REAR Cinch L plug jack (loudspeaker connection (white / rear left)) gl. Then insert the second white plug of the fourth Cinch connecting cable until it catches into the REAR Cinch L - plug jack (loudspeaker connection (white / rear left)) of the final amplifier. Insert the red plug of the fifth Cinch connecting · · · í · Connecting the vehicle's aerial Guide the coaxial connecting cord of the vehicle's aerial (powered aerial) carefully out of the front of the DIN assembly bracket to the MP3 car radio - recorder. Insert the plug of the coaxial connecting cable of the vehicle's aerial (powered aerial) until it catches into the aerial jack goof MP3 car radio recorder. Connect the 12 V DC connecting cable of a powered aerial with the aerial's plug-in fn. · · · · · · í · Attaching to the DIN assembly bracket Insert the MP3 car radio - recorder with its rear, jointly with the connected cables carefully into the DIN assembly bracket. Be sure that the cable connector cs is located in front of the connection jack dp. Ensure that nothing covers the vents of the metal casing dt. Ensure that there is no cable caught between the metal casing dtand the DIN assembly bracket. Avoid pinching as damage may lead to short circuits and an interruption of the connection cable. Insert the MP3 car radio - recorder into the DIN assembly bracket until it distinctly snaps on. GB 13 · · · · · · · · · KH2389_Radio_content_UK. indd 13 08. 09. 2005 11:39:03 Uhr Assembly / Operation · Attach the fixing screw frwith the M5 nut and washer to the holder and assembly cut-out of the car. Ensure that there is voltage on the vehicle's connection cables for the 12 V DC power supply. With a tip of a biro press the Reset button drto the front of the device once (see Fig. í · Turning off DIM button cqfor two Press and hold the seconds. The background light of the control panel 1goes out and the display window 7 reads [GOODBYE]. When turning off, the device stores all settings from the last operation. When turning the device on again, the last used audio storage medium or the tuner starts to play. · · í · · · Attaching the control panel 1 í Take the control panel 1from the storage box. Place the rear left edge of the control panel 1 to the attaching points dnto the front of the device. Carefully press the rear right edge of the control panel 1 against the eject mechanism doof the device's front until it distinctly snaps on. Selection and setting of sound settings Your settings are stored automatically VOL: Volume of loudspeakers · Press the SEL / VOL dial cpuntil the display reads [VOL]. [. . . ] Then press the RESET button drwith the tip of a biro. The device can not be operated The control panel 1is incorrectly connected. Ensure the fault-free connection of the control panel 1. or The battery of the remote control is exhausted. [. . . ]