User manual SILVERCREST KH 2411

[. . . ] Should there be visible damage to the appliance, do not take it into use. There is a chance that they could explode!Radiators) can have an effect on the device, it is not subject to direct sunlight, contact with sprayed or dripping water is avoided (do not place waterfilled objects, for example flower vases, on or next to the device) and that no open fire sources (e. Burning candles) are placed on or close to the device. [. . . ] ⷠPress again on the "ALARM ON/OFF" ´ button, until only the figures for the minutes are shown in the display (e. Press repeatedly on the button "SET" ¿ until the correct minute figure has been programmed in, e. Press again on the "ALARM ON/OFF" ´ button until only the number for the month is shown in the display, e. Press repeatedly on the button "SET" ¿, until the month has been programmed in, e. Press again on the "ALARM ON/OFF" ´ button until only the number for the day is shown in the display, e. Press once again on the button "ALARM ON/OFF" ´, until only the figure for the hours is shown in the display, e. Make sure that the indicator "AL " does not appear, as you would then be setting the alarm time, not the time display itself. ⷠPress repeatedly on the button "SET" ¿, until the required hour figure is shown, e. The letter "A " behind the figure means "AM" (forenoon), "P " means "PM" (afternoon) and "H " indicate the 24 hour display. ⷠPress again on the "ALARM ON/OFF" ´ button until only the number for the minutes is shown in the display, e. Make sure that the indicator "AL " does not appear, as you would then be setting the alarm time, not the time display itself. ⷠPress repeatedly on the button "SET" ¿ until the required minute figure has been programmed in, e. To switch the alarm function on, repeatedly press the button "SET" ¿ until three lines are shown above the colon in the display. To switch the alarm function off, repeatedly press the button until the three lines are no longer indicated. To have a signal tone sound on every full hour, press repeatedly the button "SET" ¿ until a bell symbol appears in the display. To switch the signal tone function back off, once again press these buttons repeatedly until the bell symbol is no longer shown. With the button "SET" ¿ you can review all of your programmings. When everything is programmed as described, a signal tone will sound at the programmed alarm time and continue until you press any button. For as long as the alarm function remains activated, the appliance will repeat the alarm notification every day. Clean the appliance with a dry or lightly moistened cloth only. [. . . ] Only dispose of batteries when they are fully discharged. This product comes with a 3-year warranty as of the date of purchase. This appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. [. . . ]