User manual SILVERCREST KH 5527

[. . . ] · Do not insert cutlery items or mixing tools into the mixing jug when the appliance is in use. There is a considerable risk of injury should these make contact with the swiftly rotating cutters!· In order to be able to react immediately in the event of danger, always have the appliance under supervision when it is in use. · This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. [. . . ] · Before taking the appliance into use, check to ensure that it is free of damage, check also that the power cable and plug as well as all accessories and appliance parts are undamaged. · Carefully clean all components before taking the appliance into use for the first time (see "Cleaning"). Preparing for use When all components have been cleaned as described under "Cleaning": ­ that the power cable y passes through the recess at the rear of the appliance, ­ the power plug is immediately accessible, so that it can be quickly withdrawn in the event of danger. ­ the appliance stands firmly and without risk of slipping or tipping when under vibration. ­ that the power cable y is not in the working area and thus not presenting a risk of being inadvertently snagged and tipping the appliance over. Position the appliance such that, . . . -3- Operation Warning! The motor switches itself off as soon as the mixing jug e is removed from the motor block u. It could then be overlooked that the appliance is still switched on. The motor will thus start of its own accord as soon as the mixing jug e is replaced on it: Therefore: · First insert the power plug into the wall socket when the mixer jug e is filled and mounted with its lid fitted and closed. · Before mounting the mixing jug always check to see that the appliance is switched off or that the power plug has been removed. · Before removing the mixer jug e, switch the appliance off, remove the power plug and wait for the motor to stop revolving. Selecting operating speeds When the mixer jug e is filled, completely sealed and securely fitted to the motor block u, you can then switch the appliance on. Place the switch t on . . . ­ Level 1-3 for fluid or soft foodstuffs, for mixing, blending and stirring ­ Level 3-5 for firmer foodstuffs or for hacking ­ Level Ice Crush/Clean for short, powerful impulse operation, e. g. So as not to overburden the motor, the switch t does not engage in this position. Hence, hold the switch t in this position for short periods only. Notice Fill the mixer attachment e with a maximum of 180 g of ice cubes. If filled with more than this, the appliance cannot optimally crush them. Filling and mounting the mixer jug ake the mixer attachment e from the motor unit u and remove the lid w. ­ The appliance can be stabilised by placing your hand on top of the closed liquidiser during operation. ­ For the stirring of firm or very viscous foodstuffs it can be beneficial to use the impulse-operation, which helps avoid a blocking of the cutters r. Cleaning the mixer So that you do not injure yourself on the cutters r, clean the mixer jug e only with a long handled dishwasher brush. Notice Do not use the appliance to crush grains of cooking salt, refined sugar or white sugar. For example, to make powdered sugar. In a case of stubborn soiling, the mixer jug e can also be cleaned in a dishwasher. For this, always take the mixing jug e apart, as described later. Clean the lid w and the filling cap q in a dishwasher or with the normal washing up. If you clean the liquidiser directly after use, you can often achieve a satisfactory and hygienic level of cleaning with the following alternative: Fill the mixer jug e with water, close the lid w and place the mixer jug e on the motor block u. Insert the power plug into the wall socket and activate the Ice Crush/Clean switch, causing the cutters r to rotate in the water with maximum revolutions. -5- Should this not dislodge the soiling, you can separate the lower plastic part of the mixer jug e (with the cutters r) from the the glass part: Cleaning the motor block Use a dry cloth or, at the most, a lightly moistened At every cleaning check that the contact switch one for cleaning the plastic surfaces. in the receptor for the mixer jug e is not blokked by soiling residues. If you cannot dislodge any blockages with the corner of a piece of paper, make contact with Customer Services. Under no circumstances should you use a hard object, this could damage the contact switch. Remove any possible residues on the underside of the motor block u only with a dry cloth or a stiff bristled brush. [. . . ] Mobile operators may vary. e-mail: support. ie@kompernass. com Importer KOMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY www. kompernass. com Warranty & Service The warranty for this appliance is for 3 years from the date of purchase. The appliance has been manufactured with care and meticulously examined before delivery. Please retain your receipt as proof of purchase. In the event of a warranty claim, please make contact by telephone with our Service Department. [. . . ]