User manual SILVERCREST KH 6523

[. . . ] 6 DVD PLAYER KH 6523 DVD Player Operating instructions KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www. kompernass. com ID-Nr. : KH6523 - 11/09-V2 KH 6523 A q w ert y u B i o a s d f g h 2! C 2) ; l k j 3# q w 3@ e 3!3) 2( 2* 2& 2^ 2% r t y u i o a s d f 2$ 2# 2!Remote control PAGE 2 2 2 2 3 3 4 7. 1 Inserting the batteries . Connecting the DVD player to a television 4 8. 1 Connecting to a television via ScartCable/RGB . [. . . ] · To switch the DVD player off place the POWER switch on the rear panel of the device to the OFF position. Note: The device has no display indicators when it is switched off or in the standby mode. In standby mode the standby LED lights up in the display. 11. 2 Inserting the DVD To play a disc with the DVD player: · Switch on your television. · Make sure that the DVD player is ready for operation. If the television, the DVD player and possibly other connected devices (i. e. an audio component) are ready for operation and are switched on and the DVD player is connected correctly to the television you will now see the Silvercrest logo on the TV screen If no disc is inserted into the DVD player's disc tray: The message NO DISC is displayed on the television screen. · Open the disc tray by pressing the button OPEN/CLOSE on the remote control or on the front panel of the DVD player. OPEN is displayed on the television screen. · Insert the disc in the disc tray with the inscribed/labled side up. For two-sided discs: The side you would like to play must face down. · After you have inserted the disc press the button OPEN/CLOSE on the remote control or on the front panel of the DVD player again to close the disc tray. · The contents of the disc will now be loaded; this may take a few seconds. In the meantime LOADING is displayed on the television screen. · Open the disc tray on the front panel of the DVD player by pressing the OPEN/CLOSE button. OPEN now appears in the display on the front panel of the DVD player and on the television screen. · Insert a DVD/VCD/S-VCD disc in the disc tray with the inscribed/labled side up. · Press the OPEN/CLOSE button again to close the disc tray. CLOSE will appear in the display on the front panel of the DVD player and on the television screen while the disc tray is closing. · The contents of the inserted DVD/VCD/S-VCD will now be loaded; this may take a few seconds. In the meantime LOADING blinks in the display on the front panel of the DVD player and on the television screen. · Playback of the inserted DVD/VCD/S-VCD starts automatically. Note: DVDs, VCDs and S-VCDs that you want to playback with the DVD player may possibly have a country code which is printed on the DVD's jacket. The DVD player can only playback DVDs/VCDs/S-VCDs with the country code If no country code is printed on the cover of a DVD/VCD/S-VCD. . . · but instead the symbol , then the DVD/VCD/S-VCD can be played back with the DVD player · then the DVD/VCD/S-VCD can possibly not be played back with the DVD player. You can check this by attempting to play back the DVD. [. . . ] Audio data is stored on audio CDs in CDA format. MP3 MP3 denotes a process and/or format developed by the Fraunhofer Institute for the compression of audio data. In the MP3 format compressed music pieces are only a fraction of their original size, which, for example, on CD-Rs/CD-RWs allows for storage of a considerably greater volume of music than on commercially available audio CDs, on which audio data is stored in the CDA format. Decoder The sound on DVDs with home theatre sound is saved on the DVD in encrypted (encoded) form. Different encryption formats exist for several purposes, for example AC-3 for the playback of Dolby Digital Surround Sound. In order to playback encrypted sound, the playback device (i. e. [. . . ]