User manual SILVERCREST SAS 7.2 A2

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

Sponsored Links

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual SILVERCREST SAS 7.2 A2. We hope that this SILVERCREST SAS 7.2 A2 user guide will be useful to you.

Lastmanuals help download the user guide SILVERCREST SAS 7.2 A2.


SILVERCREST SAS 7.2 A2 : Download the complete user guide (786 Ko)

Manual abstract: user guide SILVERCREST SAS 7.2 A2

Detailed instructions for use are in the User's Guide.

[. . . ] Never use the hand vacuum cleaner if the cable, plug or casing are damaged. To avoid risks, arrange for damaged power cables and/or plugs to be replaced as soon as possible by a qualified specialist or by our Customer Services. Interferences that are not carried out by a specialist workshop could lead to physical injuries. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. [. . . ] Select a suitable installation location for the wall holder 3: It should present no problem with taking the hand vacuum cleaner out of it and a mains power socket for the power adapter 4 must be accessible. Use the wall holder 3 to mark the boreholes: this will ensure the spacing is correct. Insert the wallplugs into the boreholes and, using the screws, firmly screw the wall holder 3 to the wall. Check to ensure that the on/off switch 6 has been slid back (to the position "0") before starting the charging process. Place the hand vacuum cleaner from above into the wall holder 3 so that the barrel plug 5 slips into the socket on the hand vacuum cleaner. Make certain that the dust filter 9 is always inserted before using the appliance. As the maximum, suck up only as much liquid as will fill the dirt container 0 to the MAX mark. Take the hand vacuum cleaner from the wall holder 3 or, if you do not use the wall holder 3, remove the barrel plug 5 from the socket. The crevice nozzle 2, to clean narrow and difficult to reach locations. When the hand vacuum again has enough energy to vacuum, the charge indicator lamp 7 glows green. When the charge indicator lamp 7 glows green, it means the batteries are charged to about 80%. When the charging process is complete, which may take 12 to 15 hours for completely discharged batteries, the device switches over to a trickle charge (maintenance function) automatically. Nevertheless, in order to avoid possible damage to the batteries, do not leave the appliance permanently connected to the power adapter 4. Reconnect the appliance with the power adapter 4 when the suction power has become noticeably weaker. After you have vacuumed up liquids, immediately clean the dirt container 0. Ensure that the dust filter 9/der dust filter bag is completely dry before using the appliance again. When you have finished using it, slide the on/ off switch 6 to the rear. Place the hand vacuum in the wall holder 3 and start the charging process when the vacuum power has become noticeably weaker. The hand vacuum cleaner can also be charged directly via the power adapter 4. For this, remove the barrel plug 5 with a slight twist from the wall holder 3 and insert it into the socket on the hand vacuum cleaner. [. . . ] The warranty covers only claims for material and maufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. The warranty period will not be extended by repairs made under warranty. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE SILVERCREST SAS 7.2 A2

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual SILVERCREST SAS 7.2 A2 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag