User manual SILVERCREST SEAS 20 A1

[. . . ] intended use This appliance is intended for the sharpening of knives , screwdrivers and scissors in domestic households. This appliance is not intended for commercial or industrial applications. Time (Continuous Operation) details how long an appliance may be used without the motor overheating and being damaged. Time has been reached, the appliance must be switched off until the motor has cooled itself down to room temperature (approx. [. . . ] €¢ Always draw the knife or scissors back, from the blade stop, in an even movement, not in a repetitive back and forth movement – otherwise the result will be an uneven sharpening. €¢ Do not apply any great pressure and always sharpen only clean blades, so as to avoid a premature wearing-out of the grindstone. 2012 16:34 Uhr Seite 46 • Always sharpen knives and scissors so that the blade is at an acute angle to the grindstone (as alluded to in the shape of the opening). Sharpening at the false angle can destroy any blade. €¢ After sharpening, remove any possible grinding remnants that may be on the blade with a moist cloth. If you have selected the setting "Knife with smooth edge" q (Fig. B): • Always sharpen knives with a smooth edge on both sides – for this, left and right side sharpening guides are available. €¢ In the left guide hold the knife inclined to the left, and in the right guide inclined to the right, whilst drawing the blade through. If you have selected the setting "Knife with serrated edge" w (Fig. C): • Sharpen these only on the side with the serration – the draw through direction for the knife is dependant on which side of the blade this is on. If you have selected the setting "Scissor sharpening" e (Fig. D): • Sharpen both scissor blades one after the other. For this, open the scissors out and draw both blades, one after the other, through the guide. should you wish to grind a slot-screwdriver r flat (Fig. E): • This is possible in every position of the function cap y. Appropriate to its width, insert the screwdriver through one of the two grinding openings r on the front of the function cap (see fold-out side). The end face of the screwdriver will now be ground level and flat. 2012 16:34 Uhr Seite 47 Certain edges can possibly be more easily sharpened directly on the grindstone t, without the function cap y: For these cases, the function cap yis removable (Fig. F): • Turn the function cap y until the arrow is at the top. You can now take off the function cap y. [. . . ] Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, but not for transport damage, for wearing parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. [. . . ]