User manual SILVERCREST SHTC 2200 B1 IONIC HAIRDRYER

[. . . ] Remove the plug of the Professional Hair Dryer from the power socket in the event of functional irregularity and before cleaning the appliance. To disconnect, pull only on the plug itself, not on the cable. Do not wrap the power cable around the Professional Hair Dryer and protect it from damage. [. . . ] With the cool level button u you can create a cold air stream with every combination of air and heat levels. If you wish to dry your hair particulary gently, or for the so-called "air-dryed permanent wave", use the finger diffusor i. For this, first of all remove the concentrator q and then replace it with the finger diffusor i: · Ensure that one of the plastic latches on the finger diffusor i engages into the guide rail on the hair dryer. Turn the finger diffusor i until it engages and sits firmly. With the Ion switch r you can additionally switch in the ionic function with every combination of blower and heat level combinations. When drying hair using a "normal" hair dryer, the hair tends to charge itself with static and then begins to "fly". the ionic function generates negatively charged ions. These are brought to the hair by the air flow. thereby , the positive static charge in the hair is neutralised and voided. The hair will be soft, supple, shiny and easier to style. Before you comb your hair out allow it to cool, To cool your hair you can use the button Or level 1 of the heat setting switch y. To quickly dry hair, we recommend first of all Using a high blower and heater setting for a short period. also , place the ion switch at the position r on " ". After drying the hair, switch to a lower blower and heat level to shape the hairstyle. With the supplied concentrator q you can utilise the air flow specifically for styling: · Place the concentrator q on the front of the hair dryer: Ensure that one of the plastic latches on the concentrator q engages into the guide rail on the hair dryer. Turn the concentrator q until it is firmly seated and clicks into place. Turn the concentrator q in the opposite direction and pull it away to the front if you want to use a wider air stream. First pack and transport the hair dryer when it has completely cooled down. [. . . ] This product is for private use only and is not intended for commercial use. The warranty is void in the case of abusive and improper handling, use of force and internal tampering not carried out by our authorized service branch. Your statutory rights are not restricted in any way by this warranty. [. . . ]