User manual SILVERCREST SIKP 2000 A1 INDUCTION HOB

[. . . ] Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. NEVER heat up a securely closed container. Through heat expansion it could quickly cause an explosion. This would very quickly overheat - presenting both the risk of fire and of serious damage to the hob. [. . . ] May not exceed 26 cm, so that the pan does not overhang, · And may not be less than 16 cm, so that the energy field can actually work. The base of the pan may not be uneven, rather, it must sit flat and squarely. Only then can the induction cooker function perfectly. Therefore, place it only on firm and smooth surfaces, not on textiles or fluffy surfaces, such as tablecloths. Do not place it adjacent to curtains, drapes or other textiles that, due to the airflow, could press themselves against the appliance. Before taking the appliance into use check to ensure that . The appliance is undamaged, and also the power cable with plug 0. All packaging materials are removed from the appliance. Preserve the packaging so as to be able to store the appliance under protection or to transmit it through the post, e. When you have unpacked and positioned the appliance as described above, it is now ready for use. - not weigh more than 10 kg (together with its contents). After unpacking, check to ensure all items are available. When cookware with content is standing on the hob 1: · Insert the plug 0 into the mains power socket. A signal sounds, the control lamp 8 lights up and "- L -" appears in the display 2. There is an all-round free space of minimum 10 cm, e. A free space directly above of minimum 60 cm, e. If, within 30 seconds of switching on, you do not select any further function, · If you activate the button On/Off 9 once again, also when it is in actual use. In standby mode, that is, after switching off or before switching on, indicated in the display 2 are either "- L" or "- H -". These heat indicators mean: "- L -" = "Low" - the hob temperature is < 50°C or "- H -" = "High" - the hob temperature is > 50°C For safety reasons, the cookware recognition feature switches the appliance off automatically when you . Remove the cooking vessel from the hob for longer than 15 seconds, or do not place one there. Although the energy field is immediately switched off with short cookware removals, the selected function remains active. Around every 3 seconds a signal tone issues a reminder that in roughly 15 seconds the appliance will switch itself off automatically. [. . . ] this applies also to replaced and repaired parts. Any damage and defects extant on purchase must be reported immediately after unpacking the appliance, at the latest, two days after the purchase date. Repairs made after the expiration of the warranty period are subject to payment. The warranty for this appliance is for 3 years from the date of purchase. [. . . ]