User manual SILVERCREST SKAD 1000 A1 COFFEE MACHINE

[. . . ] Safety Information Intended use Items supplied Appliance overview Setting up and connecting to the power supply Operation Before the first use . Read the operating instructions carefully before using the device for the first time and preserve this booklet for later reference. Pass this manual on to whoever might acquire the device at a future date. Connect the coffee machine only to correctly installed and earthed mains power sockets. [. . . ] Take the water tank 2 from the coffee machine and fill it with water as per the desired quantity of filter coffee. NEVER fill the water tank 2 with a total volume of more than 10 cups of water. NEVER fill the water tank 2 with less than 2 cups of water. Otherwise, the coffee machine could be damaged. You can briefly take the thermos can 8 out of the machine (for max. 30 seconds), for example, if you want to pour a coffee. Thereby, no coffee will drip from the machine. Place the thermos can back on the stand plate 0 within 30 seconds. Otherwise, the filter will overflow and coffee/water will drain from the filter holder 4. The setting is for strong coffee, the setting is for medium coffee and the setting is for mild coffee. To pour coffee from the thermos can 8 it is not necessary to completely unscrew the thermos can lid 7: 1. unscrew the thermos can lid 7 so far that the arrow points to the symbol . With this, coffee may be poured from the can without the thermos lid 7 falling off. After pouring, close the thermos can lid 7 immediately. If you do not, the coffee will cool more quickly. Rinse the thermos can 8 with hot water from before you start the brewing process. This will help the coffee to stay hot for longer! Before you switch the coffee machine on, ensure that the thermos can 8 is correctly located on the stand plate 0. The coffee machine switches itself off automatically upon completion of the brewing process. Remove the plug from the mains power socket if the coffee machine is no longer to be in use. Should you wish to keep the coffee warm in the thermos can 8 for an extended period, remove the thermos can 8 from the coffee maker when the brewing process is finished. When the thermos can 8 is standing in the coffee maker the thermos can lid 7, due to the brewing mechanism, is pressed down. [. . . ] Slide the power cable into the cable shaft q at the rear of the machine and then secure the plug in the holes above the cable shaft q. Store the appliance at a clean and dry location. The plug is not inserted does not switch on. The coffee machine is possibly defective. [. . . ]