User manual SILVERCREST SKAT 1000 EDS A1 COFFEE MACHINE

[. . . ] Lay the power cable in such a way that no one can tread on or trip over it. Never open the lid of the coffee machine during the brewing process. Remove the filter bag first when the coffee has drained away and it has cooled down. Do not hold your hands in the rising steam. [. . . ] If you do not wish to serve the coffee immediately, allow it to stand in the coffee machine. The keepwarm plate 0 will keep the coffee warm for 2 hours. After two hours the coffee machine switches itself off automatically. If you wish to switch the coffee machine off manually, press the button ON/AUTO/OFF 7 twice so that the integrated blue indicator lamp glows constantly. Ensure that the water tank 3 is not filled beyond the Max. The coffee machine starts the brewing process at the programmed time. If you wish to deactivate the Timer, press the button ON/AUTO/OFF 7 again so that the integrated blue indicator lamp glows constantly. Before cleaning, always remove the plug from the wall power socket. Before you clean the coffee machine you must remove the plug from the mains power socket. Never submerse the coffee machine in water or other fluids. Allow the coffee machine to cool down for approx. 5 minutes before commencing a further brewing process or filling it with water. Always wait until the coffee machine has cooled down before cleaning it. Wipe the housing of the coffee machine and the glass carafe with a soft cloth lightly moistened with a soapy solution. By use of the button PROG 6 you can programme the coffee machine so that it starts the brewing process at a pre-determined time. First, ALWAYS place coffee powder in the filter bag in the filter holder 2 and water into the water tank 3. After every brewing process remove the filter bag from the filter holder 2. If you do not intend to use the coffee machine for an extended period, stow the power cable in the cable shaft at the rear of the coffee machine and insert the power plug into the designated holes on the cable shaft. Then restart the brewing process and wait until all of the solution has passed through. Rinse the coffee machine through 3 times with fresh water. All of the descaling medium residues will then be removed and you can once again use the coffee machine. The coffee machine is not working: · The plug is not inserted into a power socket. [. . . ] With this appliance you receive a warranty of 3 years from the date of purchase. This appliance has been manufactured with care and thoroughly tested before delivery. Please retain your receipt as proof of purchase. In the case of a warranty claim, please make contact by telephone with our service department. [. . . ]