User manual SILVERCREST SKW 3 EDS A1

[. . . ] Read the operating instructions carefully before using the device for the first time and preserve this booklet for later reference. Pass this manual on to whoever might acquire the device at a future date. Congratulations on the purchase of your new appliance!Thereby, you have decided in favour of a modern and high quality product. [. . . ] As furniture surfaces may be made of a variety of materials and are treated with many different types of cleaning agents, it cannot be completely ruled out that some substances contain ingredients which may perish the rubber feet and soften them. Always fill liquids into a container before you measure it!You can choose between the metric and the AngloAmerican (Imperial) system. From 0 g - 999 g the unit is indicated in g/oz and from 999 g in kg/lb and g/oz. The programmed unit adjustment appears under or to the right of the weight indication in the display 6. 2) To switch between the metric and AngloAmerican systems, press the button UNIT 8 until the measurement unit details change. The scales once again shows "0", it does not take account of the weight of the receptacle. If a button is not pressed or there is not a change of the current measured weight after approx. 30 seconds, the display lighting 6 switches itself off. After a further 90 seconds the appliance returns to the Clock Mode. You can repeatedly set the scale back to "0" in order to weigh additional partial quantities. You can repeat this procedure several times. However, never place more than 5 kg on the scale. On removal of the receptacle and ingredients from the scales, and on pressing the button Z/T 4, "O" is once again indicated on the left in the display 6. This signal can be switched off by pressing any button. You can repeat this procedure several times. With removal of the receptacle and ingredients from the scales, and on pressing the button Z/ T 4, "O" is once again indicated on the left in the display 6. The timer can be used in both the clock and the weighing mode. The timer enables you to set the clock for a specific period of time, at the end of which a signal tone sounds. If you press and hold down the button Z/T 4 resp. Never place more than 5 kg on the scale. Remove items from the scale and then switch the scale back on again. [. . . ] This warranty benefit requires that, within the three-year period, the defective product and the proof of purchase (receipt) are presented and the defect is briefly described in writing, in particular what it is and when it occurred. Should the defect be covered by our warranty, we will return the product either repaired or as a new replacement. A new warranty period does not begin with the repair or replacement of the product. Warranty period and statutory defect claims The warranty period is not extended by repairs made under the warranty. [. . . ]