User manual SILVERCREST SL 35

[. . . ] Overview of equipment Front side of the receiver Overview of equipment Front side of the receiver PleaSe cut thiS carD anD enclOSe it tO the returninG GOOD 100% Black+Silver for light surfaces Guarantee m ·· 3 6 Sender please use block-writing in boxes with CAPITAL LETTERS 1 2 3 4 5 6 ­ LED STBY LED ON CH ­ CH + STANDBY Infrared sensor for the signal of the remote control LED is illuminated if the receiver is in standby mode LED is illuminated if the receiver is switched on Switches to the next lower channel location Cursor moves down Switches to the next higher channel location Cursor moves up Switches on and switches to the standby mode. The default settings will be restored if you keep this key pressed for more than 10 seconds. By doing this, your personal settings will be deleted. Surname o n th s ·· ·· m p urc h as Street cOMaG Service centre Postcode and city Rear side of the receiver Telefon no. with areacode unit 1 longs industrial estate englands lane Gorleston Great Yarmouth norfolk nr31 6Be Service-hotline: 00 44 (0) 8708 900137 e-mail: info@comag-ag. co. uk Rear side of the receiver 1 2 3 4 LNB IN IF OUT VCR TV 100 ­ 240 V~ 50/60 Hz, 20 W ON/OFF RS 232 COAXIAL AUDIO L LNB connection for the antenna cable LNB connection for a second satellite receiver SCART connection for the video set SCART connection for the TV set Mains connection Mains switch Serial port Digital coaxial audio output Left stereo audio connection Right stereo audio connection Model / type: Sl 35 Signature of buyer Remote control 5 6 7 8 9 Faulty-Description: 10 AUDIO R # -d Firstname f ro e a te ran Gua tee ·· Overview of equipment Front side of the receiver Overview of equipment Front side of the receiver PleaSe cut thiS carD anD enclOSe it tO the returninG GOOD 100% Black+Silver for light surfaces Guarantee m ·· 3 6 Sender please use block-writing in boxes with CAPITAL LETTERS 1 2 3 4 5 6 ­ LED STBY LED ON CH ­ CH + STANDBY Infrared sensor for the signal of the remote control LED is illuminated if the receiver is in standby mode LED is illuminated if the receiver is switched on Switches to the next lower channel location Cursor moves down Switches to the next higher channel location Cursor moves up Switches on and switches to the standby mode. [. . . ] Sub-menu Edit Description 1 Delete, 2 Skip, 3 Lock, 4 Create, 5 Edit, 6 Del all, Select, V- V+ Group, P+PPage, EXIT Exit 1 Delete By marking with the 1 key, selected channels can be marked to be deleted. Please confirm your selection and the safety message by pressing the "OK" key. 2 Skip By marking with the 2 key, selected channels can be marked to be skipped. Please confirm your selection and the safety message by pressing the "OK" key. Then, the selected channels are skipped when zapping. A direct input is still possible. 40 3 Lock By marking with the 3 key, selected channels can be marked to be locked. Please confirm your selection and the safety message by pressing the "OK" key. Then, the selected channels require the entry of a password (parental lock). 4 Create By pressing the 4 key, the menu "Create" will be displayed. Option Satellite TP Index TP Frequency Symbol Rate Polarity Name Description Satellite selection (example: Astra1 19. 2° East) Select the new transponder on the selected satellite. Data corresponding to the selection of the created transponder. Data corresponding to the selection of the created transponder. Data corresponding to the selection of the created transponder. By pressing the OK key, an editing mask will be displayed. By pressing the keys CH, CH, V- and V+, the curser can be moved over the keyboard. Select the symbol group with the keys 1, 2 and 41 3 of the remote control. For deleting a symbol mark the "Del" field and press the OK key. Select the "OK" field as soon as the channel name is complete and press the "OK" key to confirm. The changed channel name will be accepted. If you want to exit the keyboard without any change, press the EXIT key or mark the "Exit" field and press the OK key. Video PID Audio PID PCR PID Save Exit Video PID input with the 0-9 keys of the remote control Audio PID input with the keys 0-9 of the remote control PCR PID input with the keys 0-9 of the remote control To exit with saving changes select save and confirm by pressing the OK key. To exit without saving changes select save and confirm by pressing the OK key. 5 Edit By pressing the 5 key, the editing menu will be displayed. [. . . ] Ask your municipal authorities or local government about different methods for disposing of the equipment in an eco-friendly and proper manner. Never throw the batteries into normal household waste. Therefore, it is essential to dispose of the batteries according to the prevailing statutory regulations and the statutory return obligation. Ask your municipal authorities or local government about different methods of disposal in an eco-friendly and proper manner. Hand over used batteries to a collection centre. [. . . ]